|
Warning: this is an htmlized version!
The original is here, and the conversion rules are here. |
#######
#
# E-scripts on programs to typeset deduction trees.
#
# Note 1: use the eev command (defined in eev.el) and the
# ee alias (in my .zshrc) to execute parts of this file.
# Executing this file as a whole makes no sense.
# An introduction to eev can be found here:
#
# (find-eev-quick-intro)
# http://angg.twu.net/eev-intros/find-eev-quick-intro.html
#
# Note 2: be VERY careful and make sure you understand what
# you're doing.
#
# Note 3: If you use a shell other than zsh things like |&
# and the for loops may not work.
#
# Note 4: I always run as root.
#
# Note 5: some parts are too old and don't work anymore. Some
# never worked.
#
# Note 6: the definitions for the find-xxxfile commands are on my
# .emacs.
#
# Note 7: if you see a strange command check my .zshrc -- it may
# be defined there as a function or an alias.
#
# Note 8: the sections without dates are always older than the
# sections with dates.
#
# This file is at <http://angg.twu.net/e/dednat.e>
# or at <http://angg.twu.net/e/dednat.e.html>.
# See also <http://angg.twu.net/emacs.html>,
# <http://angg.twu.net/.emacs[.html]>,
# <http://angg.twu.net/.zshrc[.html]>,
# <http://angg.twu.net/escripts.html>,
# and <http://angg.twu.net/>.
#
#######
# «.dednat.lua» (to "dednat.lua")
# «.dednat.icn» (to "dednat.icn")
# «.dednat4-tgz-tests» (to "dednat4-tgz-tests")
# «.thereplusxy» (to "thereplusxy")
# «.splitdist» (to "splitdist")
# «.phantom-nodes» (to "phantom-nodes")
# «.tex-src-tgz» (to "tex-src-tgz")
# «.eepitch-dednat4» (to "eepitch-dednat4")
# «.dednat4-test» (to "dednat4-test")
# «.dednat41-test» (to "dednat41-test")
# «.dednat4-demo1» (to "dednat4-demo1")
# «.dednat41-demo1» (to "dednat41-demo1")
# «.tgz:make-demo1» (to "tgz:make-demo1")
# «.visible-phantoms» (to "visible-phantoms")
# «.dednat4.el» (to "dednat4.el")
# «.symlinks» (to "symlinks")
# «.dednat4-log» (to "dednat4-log")
# «.2008filterp-texsrc» (to "2008filterp-texsrc")
# «.lpeg» (to "lpeg")
# «.bitlib» (to "bitlib")
# «.loop» (to "loop")
# «.demo-loop-and-place» (to "demo-loop-and-place")
# «.ticked-arrowheads» (to "ticked-arrowheads")
# «.enddefdiag» (to "enddefdiag")
# «.dednat5» (to "dednat5")
# «.idarct» (to "idarct")
# «.idarct2017» (to "idarct2017")
# «.GA-material-pack» (to "GA-material-pack")
# «.hyperboles» (to "hyperboles")
# «.dednat6-luarepl» (to "dednat6-luarepl")
# «.luarepl» (to "luarepl")
# «.thislinetag» (to "thislinetag")
# «.processbigstr» (to "processbigstr")
# «.hyperlinks» (to "hyperlinks")
# «.BOX-dednat6» (to "BOX-dednat6")
# «.curve» (to "curve")
# «.dednat6.zip-2018» (to "dednat6.zip-2018")
# «.dednat6.zip-test» (to "dednat6.zip-test")
# «.dednat6.zip-2019» (to "dednat6.zip-2019")
# «.contours-new» (to "contours-new")
# «.sub-ZHA» (to "sub-ZHA")
# «.LPicture-add-pict2e» (to "LPicture-add-pict2e")
# «.V.walk» (to "V.walk")
# «.LPicture.addrect» (to "LPicture.addrect")
# «.TCG.addrect» (to "TCG.addrect")
# «.TCGDims» (to "TCGDims")
# «.defzha-and-deftcg» (to "defzha-and-deftcg")
# «.defub» (to "defub")
# «.qmarks-to-cuts» (to "qmarks-to-cuts")
# «.dednat6-dnt-from-lua» (to "dednat6-dnt-from-lua")
# «.output_dnt» (to "output_dnt")
# «.output-no-tex» (to "output-no-tex")
# «.hyperlinks-in-LPicture» (to "hyperlinks-in-LPicture")
# «.stackexchange» (to "stackexchange")
# «.git-repo» (to "git-repo")
# «.git-repo-test» (to "git-repo-test")
# «.git-repo-update» (to "git-repo-update")
# «.makefile» (to "makefile")
# «.ctan-guidelines» (to "ctan-guidelines")
# «.arxiv-yoneda» (to "arxiv-yoneda")
# «.tf:push» (to "tf:push")
# «.diaxydoc-and-barrdoc» (to "diaxydoc-and-barrdoc")
# «.lua-files-in-ctan-pkgs» (to "lua-files-in-ctan-pkgs")
# «.quirks-2019-jul» (to "quirks-2019-jul")
# «.colored-arrows» (to "colored-arrows")
# «.write_single_tex_file» (to "write_single_tex_file")
# «.deletecomments» (to "deletecomments")
# «.deletecomments-2021» (to "deletecomments-2021")
# «.LR.fromtcgspec-5.3» (to "LR.fromtcgspec-5.3")
# «.dednat6-xyoption-2cell» (to "dednat6-xyoption-2cell")
# «.ph1-doc» (to "ph1-doc")
# «.harrownode» (to "harrownode")
# «.extra-modules» (to "extra-modules")
# «.converting-TCG-to-TCGQ» (to "converting-TCG-to-TCGQ")
# «.dednat4-pdfs-downloading» (to "dednat4-pdfs-downloading")
# «.dednat4-texs-converting» (to "dednat4-texs-converting")
# «.tikzdiagram» (to "tikzdiagram")
# «.plabel-error-handling» (to "plabel-error-handling")
# «.bussproofs» (to "bussproofs")
# «.at:» (to "at:")
# «.texstudio» (to "texstudio")
# «.repl-pict» (to "repl-pict")
# «.lawvere-tierney» (to "lawvere-tierney")
# «.lawvere-tierney-mpunder» (to "lawvere-tierney-mpunder")
# «.V3» (to "V3")
# «.drawing-polys» (to "drawing-polys")
# «.numerozinhos» (to "numerozinhos")
# «.error-2021-04-21» (to "error-2021-04-21")
# «.color-non-open» (to "color-non-open")
# «.pictreplace» (to "pictreplace")
# «.burghardt» (to "burghardt")
# «.lean-nng» (to "lean-nng")
# «.fitch» (to "fitch")
# «.ftch» (to "ftch")
# «.slides-to-pngs» (to "slides-to-pngs")
# (find-blogme3 "sandwiches-defs.lua" "code-pdf-page-tests")
# (code-pdf-page "dn6slides" "~/dednat6/tug-slides.pdf")
# (code-pdf-text "dn6slides" "~/dednat6/tug-slides.pdf")
# (code-pdf-page "dn6article" "~/dednat6/tugboat-rev2.pdf")
# (code-pdf-text "dn6article" "~/dednat6/tugboat-rev2.pdf")
#####
#
# dednat.lua (obsolete)
# 2001may15
#
#####
# «dednat.lua» (to ".dednat.lua")
# (find-angg "LUA/dednat.lua")
# (find-angg "LATEX/Makefile")
# (find-angg "LATEX/Makefile" "dednat.lua")
# (find-angg "LATEX/Makefile" "dn_to_dnt")
#*
# (find-angg "LATEX/tese2.sty")
# (find-angg "LATEX/proof.edrx.sty")
cd ~/LATEX/
rm -v tmp.dn tmp.dnt
cat > tmp.tex <<'%%%'
% \input tese2.sty
\documentclass{book}
\usepackage{proof.edrx}
\def\ded#1{\csname ded-#1\endcsname}
\def\defded#1#2{\expandafter\def\csname ded-#1\endcsname{#2}}
\input tmp.dnt
\begin{document}
%
%:*->*\to *
%:
%: a [a->b]^1
%: -----------
%: b
%: ---------1
%: (a->b)->b
%:
%: ^dedtest
%:
$$\ded{dedtest}$$
%
\end{document}
%%%
make tmp.dvi
rexdvi tmp.dvi
#*
#####
#
# dednat.icn (obsolete)
# 2001may15
#
#####
# «dednat.icn» (to ".dednat.icn")
# (find-angg "LATEX/dednat.icn")
#####
#
# dednat4: tgz and tests
# 2008may26
#
#####
# «dednat4-tgz-tests» (to ".dednat4-tgz-tests")
# (find-es "xypic")
# (find-es "xypic" "dednat41-test")
# (find-es "xypic" "dednat41-demo1")
# (find-es "xypic" "eepitch-dednat4")
# (find-angg ".emacs" "eepitch-dednat4")
# (find-angg ".emacs" "dednat4")
# (find-angg ".emacs" "eedn4a")
# (find-dn4 "")
# (find-dn4 "Makefile")
# The README is crap:
# (find-dn4file "README")
# This is ok - copy to the dednat4/ dir:
# (find-THLw3m "dednat4.html")
# (find-TH "dednat4")
# (find-sh "grep IMG ~/TH/dednat4.blogme")
# It needs a hacker's guide, though... get logs from:
# (find-es "xypic" "eepitch-dednat4")
# Add: at: x y tag
# .xy+= x y
# there+: x y tag
# (find-anggfile "IMAGES/Atimes-dnt.png")
# (find-anggfile "IMAGES/Atimes.png")
# (find-anggfile "IMAGES/TfromFtoG.png")
# (find-anggfile "IMAGES/eqfib-trans.png")
# (find-anggfile "IMAGES/lccc-bcc.png")
# (find-anggfile "IMAGES/lccc-frob.png")
# (find-anggfile "IMAGES/preslim.png")
# (find-zsh "
cd ~/IMAGES/
A=(
Atimes-dnt.png
Atimes.png
TfromFtoG.png
eqfib-trans.png
lccc-bcc.png
lccc-frob.png
preslim.png
)
laf $A
")
#####
#
# there+xy:
# 2008jun01
#
#####
# «thereplusxy» (to ".thereplusxy")
# (find-LATEXfile "2008sheaves.tex" "thereplusxy =")
#####
#
# understand harrownodes and varrownodes
# 2008jun02
#
#####
# «splitdist» (to ".splitdist")
# (find-dn4 "dednat41.lua")
# (find-dn4 "experimental.lua")
Suppose that we want to draw a diagram like this one:
A |-----> FA
| -
| |-> |
v v
B |-----> FB
* (eepitch-dednat4)
* (eepitch-kill)
* (eepitch-dednat4)
require "experimental"
= splitdist(100, 200, nil, 20, nil)
--> 140 160
#####
#
# Documentation about phantom nodes
# 2008jun24
#
#####
# «phantom-nodes» (to ".phantom-nodes")
# Moved to: (find-dn4 "README.phantoms")
#####
#
# LaTeX source tarballs for my .texs
# 2008jun08
#
#####
# «tex-src-tgz» (to ".tex-src-tgz")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/te/
mkdir /tmp/te/
cd /tmp/te/
# (find-fline "~/LATEX/2008bcc.tex")
F=$HOME/LATEX/2008bcc.tex
cp -av $F .
cp -av ~/dednat4/examples/edrx08.sty .
cp -av ~/dednat4/examples/edrxdnt.tex .
cp -av ~/dednat4/examples/edrxdefs.tex .
cp -av ~/dednat4/examples/edrxheadfoot.tex .
~/dednat4/dednat41 $(basename $F)
cp -av $S/http/www.ctan.org/tex-archive/macros/latex/contrib/lkproof/proof.sty .
unzip -o $S/ftp/ftp.math.mcgill.ca/pub/barr/diagxy.zip diagxy.tex
latex $(basename $F)
# (find-fline "/tmp/te/")
# (find-dn4exfile "")
# (find-dn4file "Makefile")
# (find-dn4file "Makefile" "TATPROOFSFILE =")
# (find-dn4file "Makefile" "DIAGXYFILE")
# Add this?
# (find-dn4file "dednat41.lua")
# Generated by dednat41.lua
#####
#
# eepitch-dednat4
# 2008may11
#
#####
# «eepitch-dednat4» (to ".eepitch-dednat4")
# (find-angg ".emacs" "eepitch-dednat4")
# (find-angg "LUA/lua50init.lua" "load_dednat4")
# (find-dn4 "dednat41.lua")
# (find-dn4 "dednat41.lua" "tree-lib" "dolinenumbers")
* (eepitch-dednat4)
* (eepitch-kill)
* (eepitch-dednat4)
PP(abbrevs)
process "/home/edrx/dednat4/examples/edrx08.sty"
PP(abbrevs)
PP(heads)
* (eepitch-dednat4)
* (eepitch-kill)
* (eepitch-dednat4)
dolinenumbers = nil
diagram "miniadj"
dxy2Dx " 100 140 "
dxy2D " 140 a^L <= a "
dxy2D " - - "
dxy2D " | | "
dxy2D " v v "
dxy2D " 100 b => b^R "
PP("nodes =", nodes)
pushtag "a^L"; pushtag "a"; dof "<="
pushtag "a^L"; pushtag "b"; dof "|->"
pushtag "a"; pushtag "b^R"; dof "|->"
pushtag "b"; pushtag "b^R"; dof "=>"
PP("arrows =", arrows)
enddiagram()
* (eepitch-dednat4)
* (eepitch-kill)
* (eepitch-dednat4)
dolinenumbers = nil
mytostringk = mytostringk2
dofs "diagram miniadj2"
dofs "2Dx 100 140 "
dofs "2D 140 a^L <= a "
dofs "2D - - "
dofs "2D | | "
dofs "2D v v "
dofs "2D 100 b => b^R "
dofs "(( a^L a <= a^L b |-> a b^R |->"
printf("xs = %s\n", mytostring(xs))
for i=1,#nodes do printf("nodes[%d] = %s\n", i, mytostring(nodes[i])) end
for i=1,#arrows do printf("arrows[%d] = %s\n", i, mytostring(arrows[i])) end
for i=1,#ds do printf("ds[%d] = %s\n", i, mytostring(ds[i])) end
for i=1,#depths do printf("depths[%d] = %s\n", i, mytostring(depths[i])) end
PP(keys(nodes))
dofs " b b^R => ))"
dofs "enddiagram"
Note: due to a bad design decision the elements of ds are "in the
wrong order" - to push a new element we move the old elements from the
positions 1..n to 2..n+1, and then we set ds[1] to the new element...
this simplifies accessing the elements at the top of the stack, but
complicates all the rest - especially "@" and operations with the
array "depths".
One possible fix (dirty trick): use a metatable with a "__call" entry
for the table "ds"; make ds(2) return ds[-2] for any value of 2.
Notes (obsolete):
%L at = function (index) return ds[#ds - depths[1] - index] end
%L PP("@ 0 =", at(0))
%L PP("@ 1 =", at(1))
%L PP("@ 2 =", at(2))
%L PP(ds[#ds])
%L PP(ds[#ds - 1])
%L PP(#ds)
%L PP(ds)
%L mytostringk = mytostringk2
%L printf("xs = %s\n", mytostring(xs))
%L for i=1,#nodes do printf("nodes[%d] = %s\n", i, mytostring(nodes[i])) end
%L for i=1,#arrows do printf("arrows[%d] = %s\n", i, mytostring(arrows[i])) end
%L for i=1,#ds do printf("ds[%d] = %s\n", i, mytostring(ds[i])) end
%L for i=1,#depths do printf("depths[%d] = %s\n", i, mytostring(depths[i])) end
%L PP(keys(nodes))
% (find-sh "cd ~/LATEX/ && lua51 ~/dednat4/dednat41.lua tmp.tex")
% (find-angg "LUA/lua50init.lua")
#####
#
# Testing dednat41
# 2008may19
#
#####
# «dednat4-test» (to ".dednat4-test")
# «dednat41-test» (to ".dednat41-test")
# (find-dn4 "Makefile")
# (find-node "(kpathsea)File lookup")
# (find-dn4exfile "dednat4.el")
# (find-eevtmpfile "")
# (find-eevtmpfile "ee.sh")
# (find-LATEXfile "" "tmp.tex")
# (find-LATEXfile "tmp.tex")
# (find-LATEXfile "ee.tex")
# (find-angg ".emacs")
# (find-angg ".emacs" "dednat4")
# (find-es "xypic" "eepitch-dednat4")
# (find-angg ".emacs" "eedn4a")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/dntest/
mkdir /tmp/dntest/
cd /tmp/dntest/
cd ~/dednat4/
make S=$S TEXDIR=/tmp/dntest texfiles
cd /tmp/dntest/
DN4EXDIR=$HOME/dednat4/examples/
cp -v $DN4EXDIR/edrxmain41a.tex tmp.tex
cp -v $DN4EXDIR/eedemo1.tex ee.tex
cp -v $DN4EXDIR/edrx08.sty edrx08.sty
~/dednat4/dednat41 tmp.tex
TEXINPUTS=$DN4EXDIR: latex tmp.tex
# (find-fline "/tmp/dntest/")
# (find-fline "/tmp/dntest/tmp.tex")
# (find-dvipage "/tmp/dntest/tmp.dvi")
# «dednat4-demo1» (to ".dednat4-demo1")
# «dednat41-demo1» (to ".dednat41-demo1")
# (find-dn4 "Makefile" "demo1")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/dednat4/
rm -Rv demos/
mkdir demos/
make demo1
# (find-dn4 "demos/")
# (find-man "unzip")
#####
#
# dednat4: "make demo1" (from the tarball)
# 2008jun25
#
#####
# «tgz:make-demo1» (to ".tgz:make-demo1")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/dn4t/
mkdir /tmp/dn4t/
cd /tmp/dn4t/
tar -xvzf ~/dednat4/dednat4.tgz
make S=$S demo1 |& tee om
# (find-fline "/tmp/dn4t/")
#####
#
# visible phantoms
# 2008jun27
#
#####
# «visible-phantoms» (to ".visible-phantoms")
# (find-fline "~/tmp/phantom-nodes.png")
%*
% (eedn4a-bounded)
%L phantomnode = "\\myphantom{O}"
\def\myphantom{\phantom}
%D diagram harrowdemo
%D 2Dx 100 +30
%D 2D 100 A |-----> FA
%D 2D | -
%D 2D f | |-> | Ff
%D 2D v v
%D 2D +30 B |-----> FB
%D 2D
%D (( A FA |->
%D A B -> .plabel= l f
%D FA FB -> .plabel= r Ff
%D B FB |->
%D A FB harrownodes nil 20 nil |->
%D ))
%D enddiagram
%D
$$\diag{harrowdemo}
\qquad
{\def\myphantom{\red}
\diag{harrowdemo}
}
$$
%*
#####
#
# dednat4.el
# 2008jun27
#
#####
# «dednat4.el» (to ".dednat4.el")
# (find-dn4 "dednat4.el")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/dednat4/
lua51 -e 'dofile"dednat41.lua"' -i
require "experimental"
#####
#
# symlinks: tmp.tex -> edrxmain41.tex and ee.tex -> eedemo1.tex
# 2008jun27
#
#####
# «symlinks» (to ".symlinks")
# (find-dn4file "Makefile")
# Removed from the makefile:
# Ooops - here I am symlinking tmp.tex -> edrxmain41a.tex... What
# happens if I copy something to tmp.tex later? Does it cease to be a
# symlink, or does it overwrite edrxmain41a.tex?
#
# Possible solution: do not symlink - edrxmain41a.tex has a header
# that explains from where it comes.
#demo1-old: dednat41 texfiles
# mkdir -p $(DEMODIR)
# ln -sf $(DN4EXDIR)/edrxmain41a.tex $(DEMODIR)/tmp.tex
# ln -sf $(DN4EXDIR)/edrx08.sty $(DEMODIR)/edrx08.sty
# ln -sf $(DN4EXDIR)/eedemo1.tex $(DEMODIR)/ee.tex
# cd $(DEMODIR) && $(PWD)/dednat41 tmp.tex
# cd $(DEMODIR) && TEXINPUTS=$(TEXDIR): latex tmp.tex
# cd $(DEMODIR) && ln -sf edrxmain41a.tex tmp.tex
# cd $(DEMODIR) && ln -sf eedemo1.tex ee.tex
#####
#
# dednat4-log.html
# 2008jul12
#
#####
# «dednat4-log» (to ".dednat4-log")
# (find-THgrep "grep -niH -e traffic *")
# (find-blogme3grep "grep -niH -e traffic *")
# (find-blogme3 "anggdefs.lua" "TRAFFIC")
# (find-TH "dednat4")
# (find-TH "dednat4-log")
# (find-es "blogme" "traffic-lights-glyphs")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd
rm -Rv mkdir /tmp/dn4/
cd ~/dednat4/
make tarball
mkdir /tmp/dn4/
cd /tmp/dn4/
wget http://angg.twu.net/dednat4/dednat4.tgz
tar -xvzf dednat4.tgz
make
make dednat4
make texfiles
make demo2
#####
#
# 2008filterp-texsrc.tar.gz
# 2008jul12
#
#####
# «2008filterp-texsrc» (to ".2008filterp-texsrc")
# http://angg.twu.net/math/
# (find-twusfile "")
# (find-twusfile "math/")
# (find-twusfile "LATEX/")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/fi/
mkdir /tmp/fi/
cd ~/LATEX/
cp -aiv 2008filterp.{tex,dnt} filters.bib /tmp/fi/
cd /tmp/fi/
~/dednat4/.files.sh eval "{ texedrx ; texother; } | prepends"
cp -aiv $(~/dednat4/.files.sh eval "{ texedrx ; texother; } | prepends") .
rm -v edrxmain*.tex
tar -cvzf /tmp/2008filterp-texsrc.tar.gz *
laf /tmp/2008filterp-texsrc.tar.gz
laf
~/dednat4/dednat4 2008filterp.tex
latex 2008filterp.tex
bibtex 2008filterp
latex 2008filterp.tex
latex 2008filterp.tex
# (ee-cp "/tmp/2008filterp-texsrc.tar.gz" (ee-twusfile "LATEX/2008filterp-texsrc.tar.gz") 'over)
#####
#
# The "lpeg" and "bitlib" targets in the Makefile
# 2008jul21
#
#####
# «lpeg» (to ".lpeg")
# «bitlib» (to ".bitlib")
# (find-dn4 "Makefile" "lpeg")
# (find-dn4 "Makefile" "bitlib")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/dednat4/ && make tmpdir
cd /tmp/dn4/
tar -xvzf /tmp/dulua.tgz
make S=$S luabuild
tar -cvzf /tmp/dulua.tgz usrc/lua-5.1.3/
make S=$S lpegbuild
make S=$S bitlibbuild
./lua51
require "lpeg"
PP(lpeg)
assert(package.loadlib("./lbitlib.so", "luaopen_bit"))()
print(bit.bxor(6,3))
os.exit()
#####
#
# \Loop
# 2008aug01
#
#####
# «loop» (to ".loop")
# (find-diagxypage 29 "\\Loop")
# (find-diagxytext "\\Loop")
# (find-dn4 "experimental.lua")
# (find-dn4 "experimental.lua" "loop")
%*
% (eedn4a-bounded)
%D diagram ??
%D 2Dx 100 +30 +30
%D 2D 100 a --> b
%D 2D v
%D 2D +20 c d
%D 2D
%D (( a b -> b c ->
%D a loop (ul,dl)_{aa}
%D b loop (u,r)
%D c loop (dl,dr)
%D d place
%D ))
%D enddiagram
%D
$$\diag{??}$$
%*
% (eedn4a-bounded)
$$\bfig
\morphism[A`B;f]
\Loop(0,0)A(ur,ul)_g
\Loop(0,0)A(ur,ul)^a
\Loop(500,0)B(dl,dr)_h
\Loop(1000,0)CC(dl,dr)
% \Loop(1500,0)DD
\efig
$$
%*
#####
#
# demo-loop-and-place
# 2022feb08
#
#####
# «demo-loop-and-place» (to ".demo-loop-and-place")
%D diagram demo-loop-and-place
%D 2Dx 100 +15 +15
%D 2D 100 NW N NE
%D 2D +15 W C E
%D 2D +15 SW S SE
%D 2D
%D (( NW loop (l,u) N loop (ul,ur) NE loop (u,r)
%D W loop (dl,ul) C place E loop (ur,dr)^{abc}
%D SW loop (d,l) S loop (dr,dl) SE loop (r,d)
%D ))
%D enddiagram
%D
$$\pu
\diag{demo-loop-and-place}
$$
-- (find-dn6 "diagforth.lua" "arrows")
-- (find-dn6 "diagforth.lua" "arrows" "loop")
-- (find-dn6 "diagtex.lua" "DxyLoop")
#####
#
# ticked arrowheads
# 2009feb26
#
#####
# «ticked-arrowheads» (to ".ticked-arrowheads")
from Michael Barr <barr@math.mcgill.ca>
to Categories list <categories@mta.ca>
date Wed, Feb 25, 2009 at 10:08 PM
subject categories: ticked arrowheads in xy-pic and diagxy
A month or two ago, Micah McCurdy wrote to ask me if it was possible to
make an arrow with a tick in the middle (that is ----+---->) and I said I
didn't know how to do that and suggested he ask Ross Moore. Ross told him
that xy-pic didn't have that capacity. Well, Micah discovered that it
did. Here are some samples, using diagxy, but that is just a front end to
xy-pic.
%*
% (eedn4a-bounded)
$$\bfig
\node a(0,0)[A]
\node b(300,400)[B]
\arrow/@{>}|-*@{>}/[a`b;f]
\efig$$
$$\bfig
\ptriangle/>`>`@{>}|-@{|}/[A`B`C;f`g`h]
\efig$$
$$\bfig
\morphism/@{>}|-@{+}/<700,0>[ABCDE`F;h]
\efig$$
$$\bfig
\morphism/@{>}|-*@{|}/<700,0>[ABCDE`F;h]
\efig$$
%*
As far as I can tell, the * between the - and the @ has no effect. The
one limitation is that what goes inside the -@{ } must be a \dir. This is
a limitation for me, since I cannot figure out the syntax of \newdir. For
this to work, it clearly has to be something that tex can rotate.
Michael
from Michael Barr <barr@math.mcgill.ca>
to Categories list <categories@mta.ca>
date Sat, Feb 28, 2009 at 1:55 PM
subject categories: More arrow decorations
By playing with Micah's discovery (which is actually documented on page
39, third line from the bottom of Fig. 13), I have come up with the
following potentially useful decorations:
%*
% (eedn4a-bounded)
$$\bfig \morphism/@{>}|-@{|}/<500,500>[A`B;f] \efig$$
$$\bfig \morphism/@{>}|-@{x}/<500,500>[A`B;f] \efig$$
$$\bfig \morphism/@{>}|-@{o}/<500,500>[A`B;f] \efig$$
$$\bfig \morphism/@{>}|-@{*}/<500,500>[A`B;f] \efig$$
$$\bfig \morphism/@{>}|-@{||}/<500,500>[A`B;f] \efig$$
$$\bfig \morphism/@{>}|-@{)}/<500,500>[A`B;f] \efig$$
$$\bfig \morphism/@{>}|-@{(}/<500,500>[A`B;f] \efig$$
%*
The same ideas also work in native xy-pic and, for all I know, in the
matrix version as well.
#####
#
# enddefdiag
# 2009aug11
#
#####
# «enddefdiag» (to ".enddefdiag")
# (find-dn4 "experimental.lua" "def")
%*
% (eedn4a-bounded)
% (find-sh0 "cd ~/LATEX/ && dvips -D 300 -P pk -o tmp.ps tmp.dvi")
% (find-sh0 "cd ~/LATEX/ && dvired -D 300 -P pk -o tmp.ps tmp.dvi")
% (find-pspage "~/LATEX/tmp.ps")
%D diagram pmetauniv
%D 2Dx 100 +20
%D 2D 100 #1
%D 2D -
%D 2D #4|
%D 2D v
%D 2D +20 #2 ==> #3
%D 2D
%D (( #1 #3 |-> .plabel= l #4
%D #2 #3 =>
%D ))
%D enddefpdiagram 4
$$\pmetauniv abcd$$
%*
#####
#
# dednat5
# 2010apr20
#
#####
# «dednat5» (to ".dednat5")
# (find-dn4 "dednat4.lua")
# (find-dn4 "dednat5.lua")
# (find-dn4 "dednat5-shadow.lua")
# (find-tkdiff "~/dednat4/dednat4.lua" "~/dednat4/dednat5.lua")
# (find-dn5 "")
#####
#
# How to build "idarct-preprint.pdf"
# 2015sep30 / 2017mai01
#
#####
# «idarct» (to ".idarct")
# (find-angg ".emacs" "idarct")
# https://mail.google.com/mail/ca/u/0/#search/idarct/13f82428ec76b6e3 <- tgz
#
# http://angg.twu.net/math-b.html#idarct
# file:///home/edrx/TH/L/math-b.html#idarct
# (find-TH "math-b" "internal-diags-in-ct")
# (find-TH "math-b" "internal-diags-in-ct" "idarct-preprint.pdf")
# (find-idarct0file "")
# (find-idarct0file "Makefile")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
laf -d ~/LATEX/idarct/
laf ~/LATEX/idarct/
rm -Rv ~/LATEX/idarct/
mkdir ~/LATEX/idarct/
tar -C ~/LATEX/idarct/ -xvzf ~/LATEX/idarct.tgz
cd ~/LATEX/idarct/
make idarct-preprint.dvi
make idarct-preprint.pdf
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/dednat6/tests/
cp -v proof.sty ~/LATEX/idarct/
cd ~/LATEX/idarct/
make idarct-preprint.dvi
dvipdf idarct-preprint.dvi
cd ~/LATEX/idarct/
cp -v idarct-preprint.dvi ~/LATEX/
cp -v idarct-preprint.pdf ~/LATEX/
cp -v frob-sketch.eps ~/LATEX/
cp -v diagxy.tex ~/LATEX/idarct/
#####
#
# 2017idarct.tex: an attempt to port idarct to dednat6
# 2019apr22
#
#####
# «idarct2017» (to ".idarct2017")
# (find-LATEX "2017idarct.tex")
#####
#
# 2015-2-GA-material: pack into a zip file
# 2016feb15
#
#####
# «GA-material-pack» (to ".GA-material-pack")
# Superseded by: (find-angg "LUA/flsfiles.lua")
# (find-angg "LATEX/2015-2-GA-material.tex")
# (find-xpdfpage "~/LATEX/2015-2-GA-material.pdf")
# Preparation:
# (find-dn6 "dednat6.lua" "run-tests-in-test-dir")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/ga/
mkdir /tmp/ga/
cd ~/LATEX/
A=(
2015-2-GA-material.tex
diagxy.tex
edrx15.sty
edrx15defs.tex
edrxaccents.tex
edrxdnt.tex
edrxheadfoot.tex
edrxtikz.lua
istanbuldefs.tex
)
cp -v $A /tmp/ga/
mkdir /tmp/ga/dednat6/
unzip -d /tmp/ga/dednat6/ /tmp/dednat6.zip
zip -r /tmp/ga.zip *
lualatex 2015-2-GA-material.tex
# (find-fline "/tmp/ga.zip")
# (find-man "zip")
cd /tmp/ga/
lualatex -recorder 2015-2-GA-material.tex
# (find-fline "/tmp/ga/2015-2-GA-material.fls")
# (find-sh "sort /tmp/ga/2015-2-GA-material.fls")
# (find-sh "sort /tmp/ga/2015-2-GA-material.fls | grep -v /usr/")
#####
#
# Hyperboles
# 2016jul17
#
#####
# «hyperboles» (to ".hyperboles")
# (find-LATEX "2016-1-GA-material.tex")
= v(3,4)
= v(3,4):norm()
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
chdir "~/LATEX/"
dofile "edrxtikz.lua" -- (find-LATEX "edrxtikz.lua")
-- (find-LATEX "edrxtikz.lua" "Hyperbole")
PP(V)
#####
#
# dednat6/luarepl
# 2016oct07 / 2019jan06
#
#####
# «dednat6-luarepl» (to ".dednat6-luarepl")
# «luarepl» (to ".luarepl")
# (find-LATEX "2018dednat6-repl.tex")
# (find-LATEX "2018tug-dednat6.tex" "repls-2")
# Old:
# (find-es "lua5" "lua-repl-2016")
#####
#
# thislinetag
# 2017ago09
#
#####
# «thislinetag» (to ".thislinetag")
# (find-es "luatex" "thislinetag")
# (find-LATEX "2017cwm.tex" "thislinetag")
#####
#
# processbigstr (for interactive tests)
# 2017dez30
#
#####
# «processbigstr» (to ".processbigstr")
# (find-dn6 "texfile.lua" "processbigstr")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
processbigstr [[
%D diagram foo
%D 2Dx 100 +30
%D 2D 100 a <-| b
%D 2D | |
%D 2D v v
%D 2D +20 c ==> d
%D 2D
%D (( a b <-| a c -> b d -> c d =>
%D ))
%D enddiagram
]]
#####
#
# Hyperlinks to source
# 2017dez31
#
#####
# «hyperlinks» (to ".hyperlinks")
# (find-dn6 "texfile.lua" "TexFile" "hyperlink =")
# (find-dn6 "diagforth.lua" "enddiagram")
# (find-dn6 "diagforth.lua" "enddiagram" "no hyperlink yet")
# (find-dn6 "diagforth.lua" "enddiagram" "tf:hyperlink()")
# (find-dn6file "treetex.lua" "tf:hyperlink()")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
bigstr = [[
%: a b
%: ----?
%: c
%:
%: ^foo
%:
%D diagram bar
%D 2Dx 100 +30
%D 2D 100 a <-| b
%D (( a b <-|
%D ))
%D enddiagram
]]
processbigstr(bigstr)
hyperlinkfmt = '(find-es "dednat" "hyperlinks" (+ 9 %s))'
processbigstr(bigstr)
no hyperlink yet
= format("foo", 10)
= format('(find-fline "foo" %d)', 10)
#####
#
# Porting BOX to dednat6
# 2017dez29
#
#####
# «BOX-dednat6» (to ".BOX-dednat6")
# (find-dn6 "diagforth.lua" "BOX")
#
# (find-dn4 "experimental.lua" "BOX")
# (find-dn4 "examples/edrx08.sty" "savebox")
# (find-dn4 "examples/edrx08.sty" "diagprep")
# (find-idarct0file "2010diags-body.tex")
# (find-idarct0file "2010diags-body.tex" "dnc .tex=" "BOX")
# (find-idarct0file "2010diags.dnt")
# (find-idarct0file "2010diags.dnt" "\\savebox{\\myboxa}{$\\fcded{dict-1-dnc}$}")
# (find-dn6 "preamble6.lua" "preamble1")
# (find-dn6 "diagforth.lua" "enddiagram")
# (find-dn6 "diagtex.lua" "arrows_to_defdiag")
# (find-dn6grep "grep -nH -e arrows_to_defdiag *")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
bigstr = [[
%: a b d e
%: ----? ----!
%: c f
%:
%: ^foo ^bar
%:
%D diagram plic
%D 2Dx 100 +30
%D 2D 100 foo -> bar
%D
%D (( foo .tex= \fcded{foo} BOX
%D bar .tex= \fcded{bar} BOX
%D foo bar ->
%D ))
%D enddiagram
]]
processbigstr(bigstr)
#####
#
# .curve=
# 2018dec22
#
#####
# «curve» (to ".curve")
# (find-dn6grep "grep --color -nH -e curve *.lua")
# (find-dn6 "diagtex.lua" "arrow_to_TeX-test")
# (find-dn6 "diagtex.lua" "arrow_to_TeX" "curve =")
# (find-dn6 "diagforth.lua" ".curve=")
# (find-es "diagxy" "moving-labels")
# (find-es "diagxy" "shape")
# Old:
# (find-dn4grep "grep --color -nH -e curve *")
# (find-LATEXgrep "grep --color -nH -e '.curve=' *.tex")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
require "diagtex"
test = function (A) print(arrow_to_TeX(A)) end
storenode {TeX="a", tag="a", x=100, y=100}
storenode {TeX="b", tag="b", x=140, y=100}
test {from="a", to="b", shape="|->"}
test {from="a", to="b", shape="|->", label="up", placement="a"}
test {from="a", to="b", shape="|->", label="up", placement="a", slide="5pt"}
test {from="a", to="b", shape="|->", label="up", lplacement="_(0.42)"} -- err?
#####
#
# dednat6.zip: 2018 version (just after the TUGBoat article)
# 2018dec23
#
#####
# «dednat6.zip-2018» (to ".dednat6.zip-2018")
# (find-latex-upload-links "2018dednat6-extras")
# (find-angg ".zshrc" "flsfiles")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/LATEX/
cat ~/LATEX/2018tugboat-rev1.fls \
~/LATEX/2018tug-dednat6.fls \
~/LATEX/2018dednat6-extras.fls \
~/LATEX/2018dednat6-minimal.fls \
~/LATEX/2018dednat6-repl.fls \
~/LATEX/2018dednat6-no-lua.fls \
> /tmp/o.fls
flsfiles /tmp/o.fls | tee /tmp/o2.fls
(TZ=GMT date; date) > VERSION
rm dednat6.zip
zip dednat6.zip $(cat /tmp/o2.fls) \
2018tugboat-rev1.pdf \
2018tug-dednat6.pdf \
2018dednat6-extras.pdf \
2018dednat6-minimal.pdf \
2018dednat6-no-lua.pdf \
VERSION
laf dednat6.zip
# (find-sh "unzip -lv ~/LATEX/dednat6.zip")
cd ~/LATEX/
Scp-np -v dednat6.zip edrx@angg.twu.net:/home/edrx/slow_html/
Scp-np -v dednat6.zip edrx@angg.twu.net:/home/edrx/public_html/
# «dednat6.zip-test» (to ".dednat6.zip-test")
# (find-LATEX "2018dednat6-extras.tex" "dednat6.zip-test")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rfv /tmp/dn6-test/
mkdir /tmp/dn6-test/
cd /tmp/dn6-test/
wget http://angg.twu.net/dednat6.zip
# cp -v ~/LATEX/dednat6.zip .
unzip dednat6.zip
rm -v *.pdf
lualatex 2018tugboat-rev1.tex
lualatex 2018tugboat-rev1.tex
lualatex 2018tug-dednat6.tex
lualatex 2018tug-dednat6.tex
lualatex 2018dednat6-extras.tex
lualatex 2018dednat6-extras.tex
lualatex 2018dednat6-minimal.tex
lualatex 2018dednat6-no-lua.tex
mkdir no-lua/
cd no-lua/
cp -v ../2018dednat6-no-lua.tex ../2018dednat6-no-lua.dnt .
pdflatex 2018dednat6-no-lua.tex
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rfv /tmp/dn6-test-min/
mkdir /tmp/dn6-test-min/
cd /tmp/dn6-test-min/
# wget http://angg.twu.net/dednat6.zip
cp -v ~/LATEX/dednat6.zip .
unzip dednat6.zip "dednat6/**" dednat6load.lua 2018dednat6-minimal.tex
lualatex 2018dednat6-minimal.tex
xpdf 2018dednat6-minimal.pdf
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rfv /tmp/dn6-test-no-lua/
mkdir /tmp/dn6-test-no-lua/
cd /tmp/dn6-test-no-lua/
# wget http://angg.twu.net/dednat6.zip
cp -v ~/LATEX/dednat6.zip .
unzip dednat6.zip "dednat6/**" dednat6load.lua 2018dednat6-no-lua.tex
lualatex 2018dednat6-no-lua.tex
mkdir no-lua/
cd no-lua/
cp -v ../2018dednat6-no-lua.tex ../2018dednat6-no-lua.dnt .
pdflatex 2018dednat6-no-lua.tex
xpdf 2018dednat6-no-lua.pdf
# (find-fline "/tmp/dn6-test/")
# (find-fline "/tmp/dn6-test-min/")
#####
#
# dednat6.zip: version of may 2019
# 2019may15
#
#####
# «dednat6.zip-2019» (to ".dednat6.zip-2019")
# (find-TH "dednat6" "testing:script")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/LATEX/
cat ~/LATEX/2018tugboat-rev1.fls \
~/LATEX/2018tug-dednat6.fls \
~/LATEX/2018dednat6-extras.fls \
~/LATEX/2018dednat6-minimal.fls \
~/LATEX/2018dednat6-repl.fls \
~/LATEX/2018dednat6-no-lua.fls \
> /tmp/o.fls
flsfiles /tmp/o.fls | tee /tmp/o2.fls
(TZ=GMT date; date) > VERSION
rm dednat6.zip
zip dednat6.zip $(cat /tmp/o2.fls) \
2018dednat6-preproc.tex \
2018tugboat-rev1.pdf \
2018tug-dednat6.pdf \
2018dednat6-extras.pdf \
2018dednat6-minimal.pdf \
VERSION
laf dednat6.zip
# (find-sh "unzip -lv ~/LATEX/dednat6.zip")
cd ~/LATEX/
Scp-np -v dednat6.zip edrx@angg.twu.net:/home/edrx/slow_html/
Scp-np -v dednat6.zip edrx@angg.twu.net:/home/edrx/public_html/
# (find-TH "dednat6" "testing:script")
# (find-twusfile "")
#####
#
# New code for contours
# 2018dec30
#
#####
# «contours-new» (to ".contours-new")
# (find-dn6 "zhas.lua" "ZHA-walls")
# (find-dn6 "zhas.lua" "Cuts-tests")
# (find-dn6file "zhas.lua" "addcuts =")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
z = ZHA.fromspec("123432343234321")
= z
z:PP()
PP(z:leftwallgenerators())
contourstr = function (z)
local str = "00s"
local store = function (s) str = str.."-"..s end
for _,P in ipairs(z:leftwallgenerators()) do
local l1,r1 = P:to_l_r()
local l0 = l1-1
local r0 = z.minr[l0]
store(l0..r0.."w-"..l1..r1.."s")
end
store(z.topl..z.minr[z.topl].."w")
store(z.topl..z.topr.."n")
store(z.minl[z.topr]..z.topr.."e")
rwgens = z:rightwallgenerators()
for i=#rwgens,1,-1 do
local P = rwgens[i]
local l1,r1 = P:to_l_r()
local r0 = r1-1
local l0 = z.minl[r0]
store(l1..r1.."s-"..l0..r0.."e")
end
return str
end
= contourstr(z)
= z
A implementação atual é meio tosca. O ideal seria que eu
adicionasse na classe V, e na função v, o suporte a sufixos como
s, n, e, w...
#####
#
# Using a sub-ZHA (as in PHA3)
# 2018dec30
#
#####
# «sub-ZHA» (to ".sub-ZHA")
# (find-LATEX "2017planar-has-3.tex" "classifier")
# (find-dn6grep "grep --color -nH -e addcuts *.lua")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
z = ZHA.fromtcgspec("4, 5; 32, 14 25"):print()
mp = MixedPicture.new({}, z):addlrs():addcutssub("34", "c"):print()
mp = MixedPicture.new({}, z):addlrs():addcuts("2/1"):print()
mp = MixedPicture.new({}, z):addlrs():addcuts("4/3"):print()
mp = MixedPicture.new({}, z):addlrs():addcuts("5/4"):print()
mp = MixedPicture.new({}, z):addlrs():addcuts("2|3"):print()
z:PP()
-- (find-dn6 "zhas.lua" "MixedPicture-zha")
-- (find-dn6 "zhas.lua" "MixedPicture-zhalrf-tests")
myspec = "1R2R3212RL1"
mycuts = "c 4321/0 0123|45|6"
mytop = v"35"
myf = "lr -> lr:below(mytop) and lr:lr() or '..'"
mp = mpnew({}, myspec):addcutssub(mytop, mycuts):addlrs():print()
mp = mpnew({}, myspec):addcutssub(mytop, mycuts):adddots():print()
mp = mpnew({}, myspec):addcutssub(mytop, mycuts):zhalrf0(myf):print()
mytop = v"34"
mp = mpnew({}, myspec):addcutssub(mytop, mycuts):zhalrf0(myf):print()
mp:print()
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
myspec = "1232RL1"
mycuts = "c 32/10 012|3"
mytop = v"35"
myf = "lr -> lr:below(mytop) and lr:lr() or '..'"
foo = function (top, opts)
mytop = v(top)
mpnew(opts, myspec):addcutssub(mytop, mycuts):zhalrf0(myf):print()
end
foo("33", {})
foo("32", {})
foo("20", {})
foo("10", {})
-- (find-LATEX "2017planar-has-1.tex" "topologies-as-HAs")
-- (find-LATEX "2017planar-has-1.tex" "topologies-on-2CGs")
-- (ph1 "topologies-on-2CGs")
-- (ph1 "topologies-on-2CGs" ":addgens()")
-- (ph1p 27 "topologies-on-2CGs")
-- (ph1p 30)
-- (find-dn6file "zhas.lua" "addgens =")
#####
#
# Adding arbitrary pict2e code to an LPicture object
# 2019apr27
#
#####
# «LPicture-add-pict2e» (to ".LPicture-add-pict2e")
# (find-dn6 "picture.lua" "LPicture")
# (find-dn6 "picture.lua" "LPicture" "addtex =")
# (find-dn6 "picture.lua" "LPicture" "addtex =" "addt")
# (find-dn6 "zhas.lua" "MixedPicture")
# (find-dn6 "zhas.lua" "MixedPicture-zhalrf-tests")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
mp = mpnew({}, "123454321")
mp = mpnew({}, "123454321"):addlrs()
mp = mpnew({}, "123454321"):addlrs():addcontour()
mp:print()
mp:lprint()
mp.lp:print()
mp.lp:addtex("HELLO"):print()
mp.lp:addtex("HELLO"):print()
mp.lp:addt("\\polygon%s%s%s%s", 2, 3, 4, 5):print()
PPV(LPicture.__index)
PPV(MixedPicture.__index)
mp = mpnew({}, "123454321")
#####
#
# Adding a V.walk method and support for things like "23e"
# 2019apr28
#
#####
# «V.walk» (to ".V.walk")
# (find-dn6 "picture.lua" "V")
# (find-dn6 "picture.lua" "V" "v = V.fromab")
# (find-dn6 "picture.lua" "V" "walk =")
# (find-dn6 "picture.lua" "V" "fromab =")
# (find-dn6 "picture.lua" "V" "fromab =" "ensw")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
= v"22"
= v"22":w()
PPV(V.__index)
= v"22"
= v"22":walk"e"
= v"22e"
# TODO: simplify this:
# (find-dn6 "zhas.lua" "Cuts")
# (find-dn6 "zhas.lua" "Cuts" "addcuts =")
# (find-dn6 "zhas.lua" "Cuts" "addcuts =" "local f =")
#####
#
# LPicture.addrect
# 2019apr28
#
#####
# «LPicture.addrect» (to ".LPicture.addrect")
# (find-dn6 "picture.lua" "LPicture")
# (find-dn6 "picture.lua" "LPicture" "addtex =")
# (find-dn6 "picture.lua" "LPicture" "addtex =" "addt")
# (find-dn6 "picture.lua" "LPicture" "addrect4 =")
# (find-dn6 "zhas.lua" "MixedPicture")
# (find-dn6 "zhas.lua" "MixedPicture-zhalrf-tests")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
mp = mpnew({}, "123454321")
mp = mpnew({}, "123454321"):addlrs()
mp = mpnew({def="foo"}, "123454321"):addlrs()
LPicture.__index.addrect4 = function (lp, x0, y0, x1, y1)
return lp:addt("\\polygon(%s,%s)(%s,%s)(%s,%s)(%s,%s)",
x0,y0, x1,y0, x1,y1, x0,y1)
end
LPicture.__index.addrect2 = function (lp, x0y0, x1y1)
local x0,y0 = x0y0:to_x_y()
local x1,y1 = x1y1:to_x_y()
return lp:addt("\\polygon(%s,%s)(%s,%s)(%s,%s)(%s,%s)",
x0,y0, x1,y0, x1,y1, x0,y1)
end
mp.lp:addrect2(v"00", v"23")
mp.lp:print()
#####
#
# Adding rectangles to TCG to debug dimensions
# 2019apr28
#
#####
# «TCG.addrect» (to ".TCG.addrect")
# (find-LATEX "edrxpict.lua" "TCG")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
chdir "~/LATEX/"
require "edrxpict"
#####
#
# TCGDims
# 2019apr28
#
#####
# «TCGDims» (to ".TCGDims")
# (find-LATEX "edrxpict.lua" "TCGDims")
# (find-dn6 "picture.lua" "LPicture")
# (find-dn6 "picture.lua" "LPicture" "addtex =")
# (find-dn6 "picture.lua" "LPicture" "addtex =" "addt")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
chdir "~/LATEX/"
require "edrxpict"
lp = LPicture.new({meta="p b", def="foo"})
lp:addpoint(v(1,1))
lp:addpoint(v(4,8))
lp:addrect2(v(2,1), v(3,2))
= lp
LPicture.__index.addarrow = function (lp, A, B, t0, t1)
lp:addtex(Line.newAB(A, B, t0, t1):pictv())
end
-- (find-LATEX "edrxpict.lua" "TCGDims")
lp = LPicture.new({meta="p b", def="foo"})
td = TCGDims {h=6, v=3, q=2, crh=2, crv=1, qrh=1}
lp:addpoint(td:lowerleft())
lp:addpoint(td:upperright(4))
lp:addrectr(td:L(0), td:cellradius())
lp:addrectr(td:L(1), td:cellradius())
lp:addrectr(td:L(2), td:cellradius())
lp:addrectr(td:R(0), td:cellradius())
lp:addrectr(td:R(1), td:cellradius())
lp:addrectr(td:R(2), td:cellradius())
lp:addrectr(td:R(3), td:cellradius())
lp:addrectr(td:R(4), td:cellradius())
lp:addarrow(td:larrowparams(2, 1))
lp:addarrow(td:lrarrowparams(2, 1))
lp:addarrow(td:lrarrowparams(2, 0))
= lp
#####
#
# \defzha and \deftcg
# 2019apr29
#
#####
# «defzha-and-deftcg» (to ".defzha-and-deftcg")
# (find-LATEX "2017planar-has-defs.tex" "defzha-and-deftcg")
# (find-dn6 "picture.lua" "makepicture")
# (find-dn6 "picture.lua" "makepicture" "options.tdef")
# (find-dn6 "picture.lua" "makepicture" "options.zdef")
\def\defzha#1#2{\expandafter\def\csname zha-#1\endcsname{#2}}
\def\ifzhaundefined#1{\expandafter\ifx\csname zha-#1\endcsname\relax}
\def\zha#1{\ifzhaundefined{#1}
\errmessage{UNDEFINED ZHA: #1}
\else
\csname zha-#1\endcsname
\fi
}
\def\deftcg#1#2{\expandafter\def\csname tcg-#1\endcsname{#2}}
\def\iftcgundefined#1{\expandafter\ifx\csname tcg-#1\endcsname\relax}
\def\tcg#1{\iftcgundefined{#1}
\errmessage{UNDEFINED TCG: #1}
\else
\csname tcg-#1\endcsname
\fi
}
#####
#
# defub
# 2021jul17
#
#####
# «defub» (to ".defub")
# Example: (find-LATEX "2017planar-has-1.tex" "prop-calc-ZHA")
# (find-LATEX "2017planar-has-1.tex" "prop-calc-ZHA" "defub")
# (find-LATEXgrep "grep --color=auto -nH --null -e 'defub' *.tex")
# (find-LATEXgrep "grep --color=auto -nH --null -e '%L defub' *.tex")
#####
#
# A way to convert question marks to cuts
# 2019apr29
#
#####
# «qmarks-to-cuts» (to ".qmarks-to-cuts")
# (find-dn6 "zhas.lua" "MixedPicture-J-tests")
# (find-dn6 "zhas.lua" "MixedPicture-J-tests" "Imp")
# (find-dn6 "zhas.lua" "mpnewJ")
# (find-dn6 "zhas.lua" "mpnewJ" ":zhaJcuts()")
# (find-dn6 "zhas.lua" "MixedPicture-zha")
# (find-dn6 "zhas.lua" "MixedPicture-zha" "zhaJcuts =")
# (find-dn6 "zhas.lua" "ZHA-getcuts")
# (find-dn6 "zhas.lua" "ZHA-getcuts" "getcuts =")
# (find-dn6 "tcgs.lua" "qmarks-cuts")
# (find-dn6 "zhas.lua" "Cuts-tests")
# (find-dn6 "zhas.lua" "Cuts-tests" "c:addcuts(")
# (find-dn6 "zhas.lua" "Cuts")
# (find-dn6 "zhas.lua" "Cuts" "addcuts =")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
require "tcgs"
mp = mpnewJ({}, "1234RR321", "P -> z:Imp(v'12', P)")
= mp
= mp.zha:getcuts(mp.J)
= mp:addlrs()
PP(qmarkstocuts(".??", "..???"))
PP(cutstoqmarks "321/0 0|1|2345")
-- _5 ?
-- _4 ?
-- ? 3_ _3 ?
-- ? 2_ _2
-- 1_ _1
#####
#
# How to run dednat6 from a Lua without TeX and generate a .dnt
# 2019apr29
#
#####
# «dednat6-dnt-from-lua» (to ".dednat6-dnt-from-lua")
# (find-LATEXfile "2018dednat6-no-lua.tex" "write_dnt_file()")
# (find-dn6 "output.lua" "write_dnt_file")
# (find-LATEX "dednat6load.lua")
# (find-dn6file "preamble6.lua" "\\def\\pu{\\directlua{pu()}}")
# (find-dn6 "block.lua" "texfile0")
# (find-dn6 "block.lua" "texfile0" "pu =")
# (find-dn6 "output.lua" "output")
# (find-dn6 "output.lua" "output" "output_verbose =")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
chdir "~/LATEX/"
-- (find-LATEX "dednat6load.lua")
dednat6dir = "dednat6/" -- (find-dn6 "")
dofile(dednat6dir.."dednat6.lua") -- (find-dn6 "dednat6.lua")
dofile(dednat6dir.."block.lua") -- (find-dn6 "block.lua")
texfile0("2018dednat6-minimal.tex")
tex = {print = function () end}
-- pu(tf.j)
tf:processuntil(tf.j)
print(dnt_log)
#####
#
# Changing output_dnt to add debug code
# 2019may02
#
#####
# «output_dnt» (to ".output_dnt")
# (find-dn6 "output.lua" "output_dnt")
%L output_dnt = function (str)
%L dnt_log = dnt_log..str.."\n"
%L end
%L output_dnt = function (str)
%L dnt_n = dnt_n or 1
%L local dbg = "% "..dnt_n.."\n"
%L if dnt_n == 15 then dbg = dbg..debug.traceback().."\n" end
%L dnt_log = dnt_log..dbg..str.."\n"
%L dnt_n = dnt_n + 1
%L end
#####
#
# Changing output() to make it run well outside latex
# 2019dec15
#
#####
# «output-no-tex» (to ".output-no-tex")
# (find-dn6 "output.lua" "output_dnt")
output = function (str) print(str) end
#####
#
# Add things like "% %L-block in lines 42-99" to the latex of LPictures
# 2019apr30
#
#####
# «hyperlinks-in-LPicture» (to ".hyperlinks-in-LPicture")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/LATEX/
./dednat6load.lua -t 2019logicday.tex
# (find-LATEXsh "./dednat6load.lua -t 2019logicday.tex")
# (find-LATEXsh "./dednat6load.lua -t 2019logicday.tex" "\\def\\Kmini")
# Better line numbers in the output:
# (find-dn6 "treetex.lua" "TreeNode")
# (find-dn6 "treetex.lua" "TreeNode" "TeX_deftree = ")
# (find-dn6grep "grep --color -nH -e TeX_deftree *.lua")
# (find-dn6file "block.lua" "hyperlink =")
# (find-dn6grep "grep --color -nH -e hyperlink *.lua")
# (find-dn6grep "grep --color -nH -e 'tf:hyperlink()' *.lua")
# (find-dn6 "block.lua" "Block")
# (find-dn6 "block.lua" "Block" "hyperlink =")
# (find-dn6 "treetex.lua" "TeX_deftree_tatsuta")
# (find-dn6 "treetex.lua" "TeX_deftree_tatsuta" "tf:hyperlink()")
# (find-dn6 "diagtex.lua" "arrows_to_defdiag")
# (find-dn6grep "grep --color -nHw -e Line *.lua")
# (find-dn6 "texfile.lua" "TexFile")
# (find-dn6 "texfile.lua" "TexFile" "Line %s")
# (find-dn6 "picture.lua" "LPicture")
# (find-dn6 "picture.lua" "LPicture" "output =")
#####
#
# Dednat6 at stackexchange
# 2019may17
#
#####
# «stackexchange» (to ".stackexchange")
# https://tex.stackexchange.com/questions/468/what-is-the-best-package-out-there-to-typeset-proof-trees/491248#491248
#####
#
# A git repository for dednat6 - creating it (obsolete)
# 2019may17
#
#####
# «git-repo» (to ".git-repo")
# (find-eev2-links)
# (find-es "dednat" "dednat6.zip-2019")
# (find-LATEXfile "" " dednat6.zip")
# https://github.com/edrx/dednat6
# https://github.com/edrx/dednat6/archive/master.zip
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
dednat6files () { unzip -Z1 ~/LATEX/dednat6.zip; }
dednat6files () {( cd /tmp/dednat6/ && git ls-files; )}
mkdir -p ~/dednat6/dednat6/lua-repl/repl/
cd ~/dednat6/
# (...)
dednat6files | my-cmp-tkdiff "~/LATEX/" "~/dednat6/"
# (find-eevfile "README.md")
# (find-fline "~/dednat6/README.md")
git add README.md
git commit -m "first commit"
git remote add origin https://github.com/edrx/dednat6.git
git push -u origin master
#####
#
# Downloading and testing dednat6 from git
# 2019may21
#
#####
# «git-repo-test» (to ".git-repo-test")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rfv /tmp/dednat6/
cd /tmp/
git clone https://github.com/edrx/dednat6
cd /tmp/dednat6/
make
make clean
laf
# (find-gitk "/tmp/dednat6/")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rfv /tmp/master.zip
rm -Rfv /tmp/dednat6-master/
mkdir /tmp/dednat6-master/
cd /tmp/
wget https://github.com/edrx/dednat6/archive/master.zip
unzip master.zip
cd /tmp/dednat6-master/
make
make clean
laf
#####
#
# Uploading recent updates to the git repository
# 2019jul19
#
#####
# «git-repo-update» (to ".git-repo-update")
# (find-angg ".emacs" "find-dednat6-links")
# (find-dednat6-links)
# (find-eev2-links)
# (find-angg "dednat6/")
# https://github.com/edrx/dednat6
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
dednat6files () {( cd /tmp/dednat6/ && git ls-files; )}
dednat6pdffiles () {( cd /tmp/dednat6/ && ls *.pdf | cat; )}
dednat6pdffiles () {( cd ~/dednat6/ && ls *.pdf | cat; )}
(TZ=GMT date; date) > ~/dednat6/VERSION
rm -Rfv /tmp/dednat6
cd /tmp/
git clone https://github.com/edrx/dednat6
cd /tmp/dednat6/
PAGER=cat git log --oneline --graph --all -20
# (find-fline "/tmp/")
# (find-fline "/tmp/dednat6/")
# (find-gitk "/tmp/dednat6/")
# First step: make sure that ~/LATEX/dednat6/
# and ~/dednat6/ are in sync.
#
cd /tmp/dednat6/
dednat6files | grep lua | my-cmp-tkdiff "~/LATEX/" "~/dednat6/"
dednat6files | my-cmp-tkdiff "~/dednat6/" /tmp/dednat6/
# cp -iv ~/LATEX/dednat6/diagtikz.lua dednat6/
# git add dednat6/diagtikz.lua
# cp -iv ~/dednat6/demo-tikz.tex .
# git add demo-tikz.tex
MSG="Make deletecomments_2021 the default."
MSG="Added the DeleteComments class in output.lua."
MSG="Now '%L' blocks ignore the first space after the '%L'."
MSG="Added 'newnode:' and 'at:'."
MSG="Rewrote lualoader.lua to make it handle a bug in TeXLive 2020."
MSG="Added the classes ProofSty and BussProofs to treetex.lua."
MSG="Added diagtikz.lua and demo-tikz.tex."
MSG="Rewrote demo-tikz.tex."
MSG="Added more comments to diagtex.lua."
MSG="Added 'xy+='."
echo "$MSG"
# (magit-status "/tmp/dednat6/")
git commit -a -m "$MSG"
# (find-eevsh0 "PAGER=cat git log -1 --pretty=tformat:%s")
# git commit -a --amend -m "$MSG"
# (find-gitk ee-eevdir)
# (find-eevsh0 "gitk &")
git push
# edrx Fa
cd /tmp/dednat6/
cd ~/dednat6/
make veryclean
make
make clean
ls
laf
dednat6pdffiles
rm -v /tmp/dednat6.zip
zip /tmp/dednat6.zip $(dednat6files) $(dednat6pdffiles)
laf /tmp/dednat6.zip
unzip -l /tmp/dednat6.zip
cp -v /tmp/dednat6.zip ~/LATEX/
cd /tmp/
Scp-np dednat6.zip edrx@angg.twu.net:/home/edrx/slow_html/
Scp-np dednat6.zip edrx@angg.twu.net:/home/edrx/public_html/
Scp-np -v dednat6.zip edrx@angg.twu.net:/home/edrx/public_html/
# (find-dednat6 "Makefile")
# (find-fline "/tmp/dednat6/Makefile")
#####
#
# A Makefile for the dednat6/ directory
# 2019may19
#
#####
# «makefile» (to ".makefile")
# (find-dednat6 "Makefile")
# (find-dednat6 "")
# (find-dednat6sh "ls *.tex; ls *.lua; ls *.png")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/dednat6/
make veryclean
make -n
make all
# (find-es "git" "git-ls-files")
git ls-files
make tugboat-rev2.pdf
git rm ltugboat.cls
git add Makefile
git commit -a -m 'Added a makefile'
git commit -a -m 'Small doc fixes.'
git push
make clean
laf
make all
laf
make clean
laf
make demo-minimal.pdf
make demo-preproc.pdf
make demo-preproc.subdirpdf
make demo-write-dnt.pdf
make demo-write-dnt.subdirpdf
make tugboat-rev2.pdf
#####
#
# Guidelines for preparing Dednat6 for submission to CTAN
# 2019may21
#
#####
# «ctan-guidelines» (to ".ctan-guidelines")
# https://tex.stackexchange.com/questions/25116/what-is-good-practice-when-preparing-a-package-for-ctan
#####
#
# Submitting my notes on Yoneda to Arxiv
# 2019jun01
#
#####
# «arxiv-yoneda» (to ".arxiv-yoneda")
# http://angg.twu.net/LATEX/2019notes-yoneda.pdf
# https://arxiv.org/user/
# https://arxiv.org/submit/2713866/preview
# https://arxiv.org/submit/2713866/view
# (nyo)
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
cd ~/LATEX/
lualatex 2019notes-yoneda.tex
pdflatex -record 2019notes-yoneda.tex
flsfiles-zip 2019notes-yoneda.fls 2019notes-yoneda.zip
rm -rfv /tmp/edrx-latex/
mkdir /tmp/edrx-latex/
unzip -d /tmp/edrx-latex/ ~/LATEX/2019notes-yoneda.zip
cd /tmp/edrx-latex/
pdflatex 2019notes-yoneda.tex
latex 2019notes-yoneda.tex
# (find-man "unzip")
# (find-fline "/tmp/edrx-latex/")
# (find-fline "~/LATEX/2019notes-yoneda.zip")
# (find-sh "cp -v ~/LATEX/2019notes-yoneda.zip /tmp/")
# (find-xpdfpage "/tmp/edrx-latex/2019notes-yoneda.pdf")
# ! LaTeX Error: Option clash for package hyperref.
# https://www.quora.com/Should-I-post-my-paper-to-the-arXiv-before-I-get-a-decision-from-a-conference-journal
# https://veronikach.com/phd-advice/my-thoughts-on-preprints/
# https://tex.stackexchange.com/questions/329461/arxiv-option-clash-for-package-hyperref-when-there-are-no-options
# https://arxiv.org/help/submit_tex
# https://arxiv.org/help/faq/mistakes
# https://arxiv.org/help/hypertex
A diagram for the Yoneda Lemma (in which each node and arrow can be
interpreted precisely as a ``term'', and most of the interpretations
are ``obvious''; plus dictionaries!!!)
The full title of these slides is:
``A diagram for the Yoneda Lemma (In which each node and arrow can be
interpreted precisely as a `term', and most of the interpretations are
`obvious'; plus dictionaries!!!)''
This is a set of slides showing how to represent
the Yoneda Lemma ---
or, rather, three ``Yoneda Lemmas'' --- as diagrams, in a way that le
This is a set of slides showing how to represent the Yoneda Lemma ---
or, rather, three ``Yoneda Lemmas'' --- as diagrams, in a way in which
eacy node and arrow can be interpreted precisely as a term in a type
system or in Agda,
Most of the details that do not appear in these 6-node diagrams that
are needed for the translation to Agda can
This is a set of slides showing how to interpret the three ``Yoneda
Lemmas'' as diagrams with five or six nodes each, in a way in which
each node and arrow can be interpreted precisely as a term in a type
system or in Agda.
These 5- or 6-node diagrams do not have all the details needed for the
translation into terms, but we show how to infer the missing details
using the technique of ``internal diagrams''.
#####
#
# tf:push and tf:pop
# 2019jul02
#
#####
# «tf:push» (to ".tf:push")
# (find-dn6 "stacks.lua")
# (find-dn6 "block.lua")
# (find-dn6 "block.lua" "TexLines")
# (find-dn6 "block.lua" "texfile0")
# (find-dn6 "block.lua" "tf_push_and_tf_pop")
#####
#
# diaxydoc.pdf and barrdoc.pdf
# 2019jul16
#
#####
# «diaxydoc-and-barrdoc» (to ".diaxydoc-and-barrdoc")
# (find-angg ".emacs" "diaxydoc-and-barrdoc")
# https://ctan.org/pkg/diagxy
# http://tug.ctan.org/tex-archive/macros/generic/diagrams/diagxy/diaxydoc.pdf
# http://tug.ctan.org/tex-archive/macros/latex/contrib/xypic/doc/barrdoc.pdf
# (find-tlsh "find * | sort | grep diaxydoc")
# (find-tlsh "find * | sort | grep barrdoc")
# (find-fline "/usr/local/texlive/2018/texmf-dist/doc/generic/barr/" "diaxydoc.pdf")
# (find-fline "/usr/local/texlive/2018/texmf-dist/doc/generic/xypic/" "barrdoc.pdf")
;; (find-diaxydocpage)
;; (find-diaxydoctext)
;; (find-barrdocpage)
;; (find-barrdoctext)
;; (find-barrdocpage 2 "\\usepackage[barr,pdf]{xy}")
;; (find-barrdoctext 2 "\\usepackage[barr,pdf]{xy}")
;; (find-barrdocpage 24 "5.3 Empty placement and moving labels")
;; (find-barrdoctext 24 "5.3 Empty placement and moving labels")
;; (find-barrdocpage 33 "5.9 A few samples")
;; (find-barrdoctext 33 "5.9 A few samples")
;; (find-diaxydocpage 34 "4.9 A few samples")
;; (find-diaxydoctext 34 "4.9 A few samples")
#####
#
# Lua files in CTAN packages
# 2019jul18
#
#####
# «lua-files-in-ctan-pkgs» (to ".lua-files-in-ctan-pkgs")
# https://tug.org/pipermail/tex-live/2019-July/043918.html
# https://tug.org/pipermail/tex-live/2019-July/043922.html invitation
* e-mail to texlive: Packages that only have Lua files
https://tug.org/pipermail/tex-live/2019-July/043931.html
https://mail.google.com/mail/ca/u/0/#sent/QgrcJHsHpDWxZJHjjFnVDPsgGhwhCsfctBG
Packages that only have Lua files
Hi List,
Are there any examples on CTAN of packages that are made of Lua files
only, except for documentation? I have this package here, that I would
like to submit to CTAN soon - i.e., in a few months - that is like
that...
http://angg.twu.net/dednat6.html
In order to use it, in, say, foo.tex, one has to copy to the same
directory of foo.tex the file "dednat6load.lua" and the directory
"dednat6/" - that only contains Lua files.
Thanks in advance!!!
Eduardo Ochs
http://angg.twu.net/dednat6.html
http://angg.twu.net/math-b.html
http://angg.twu.net/#eev
# https://tug.org/pipermail/tex-live/2019-July/043935.html xindex
# https://ctan.org/pkg/xindex
# (find-tlsh "find * | sort | grep xindex")
# https://tug.org/pipermail/tex-live/2019-July/043937.html .sty
# https://tug.org/pipermail/tex-live/2019-July/043938.html lualibs, luaotfload
#####
#
# Mapping the quirks that don't let me create a .sty for dednat6
# 2019jul20
#
#####
# «quirks-2019-jul» (to ".quirks-2019-jul")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/quirks/
mkdir /tmp/quirks/
cd ~/dednat6/
cp -av demo-minimal.tex dednat6load.lua dednat6/ /tmp/quirks/
cd /tmp/quirks/
lualatex demo-minimal.tex
cp -iv demo-minimal.tex demo-BCD.tex
cp -iv demo-minimal.tex demo-BDC.tex
cp -iv demo-minimal.tex demo-BD.tex
cp -iv demo-minimal.tex demo-CDB.tex
cp -iv demo-minimal.tex demo-DCB.tex
# (find-fline "/tmp/quirks/demo-minimal.tex" 56)
# (find-fline "/tmp/quirks/demo-BCD.tex" 56)
# (find-fline "/tmp/quirks/demo-BDC.tex" 56)
# (find-fline "/tmp/quirks/demo-BD.tex" 56)
# (find-fline "/tmp/quirks/demo-CDB.tex" 56)
# (find-fline "/tmp/quirks/demo-DCB.tex" 56)
lualatex demo-BCD.tex
lualatex demo-BDC.tex
lualatex demo-BD.tex
lualatex demo-CDB.tex
lualatex demo-DCB.tex
# (find-fline "/tmp/quirks/a.tex")
# (find-fline "/tmp/quirks/")
# (find-pdf-page "/tmp/quirks/demo-BCD.pdf")
# (find-pdf-page "/tmp/quirks/demo-BDC.pdf")
# (find-pdf-page "/tmp/quirks/demo-BD.pdf")
# (find-pdf-page "/tmp/quirks/demo-CDB.pdf")
# (find-pdf-page "/tmp/quirks/demo-DCB.pdf")
# BCD: default, good
# BCD: some omegas
# BD: many omegas
# DCB: LaTeX Error: Missing \begin{document}.
\catcode`\^^J=10 % (find-es "luatex" "spurious-omega")
\directlua{dofile "dednat6load.lua"} % (find-dednat6 "dednat6load.lua")
% %\catcode`\^^J=10
% \directlua{dofile "dednat6load.lua"}
% -> many omegas
% \begin{document}
% \catcode`\^^J=10 % (find-es "luatex" "spurious-omega")
% \directlua{dofile "dednat6load.lua"} % (find-dednat6 "dednat6load.lua")
% -> everything works
#####
#
# colored-arrows
# 2019aug03
#
#####
# «colored-arrows» (to ".colored-arrows")
\def\ca#1{{\color {Red}#1}}
\def\cb#1{{\color{Yellow}#1}}
\def\cc#1{{\color {Blue}#1}}
\def\cd#1{{\color {Green}#1}}
\ca{1}\cb{2}\cc{3}\cd{4}
%D diagram ??
%D 2Dx 100 +30
%D 2D 100 A B
%D 2D
%D 2D +20
%D 2D
%D (( A .tex= \ca{A}
%D B .tex= \cb{B}
%D A B |-> .plabel= a \cc{C}
%D
%D ))
%D enddiagram
%D
$$\pu
\diag{??}
$$
\defdiag{??}{ % In the "%D"-block in lines 65--77
\morphism(0,0)|a|/|->/<450,0>[{\ca{A}}`{\cb{B}};{\cc{C}}]
}
\defdiag{??}{ % In the "%D"-block in lines 65--77
\morphism(0,0)|a|/|->/<450,0>[{\ca{A}}`{\cb{B}};{\cc{C}}]
\color{Green}
\morphism(0,200)|a|/|->/<450,0>[{\ca{A}}`{\cb{B}};{\cc{C}}]
\color{Black}
\morphism(0,400)|a|/|->/<450,0>[{\ca{A}}`{\cb{B}};{\cc{C}}]
}
$$
\diag{??}
$$
#####
#
# write_single_tex_file
# 2019aug03
#
#####
# «write_single_tex_file» (to ".write_single_tex_file")
# (find-dednat6file "demo-write-dnt.tex")
# (find-dednat6file "demo-write-single.tex")
# (find-dn6 "output.lua" "write_dnt_file")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
chdir "~/dednat6/"
#####
#
# deletecomments (I need a better version of this)
# 2019aug16
#
#####
# «deletecomments» (to ".deletecomments")
# (find-dn6 "output.lua" "deletecomments")
# (find-LATEXgrep "grep --color -nH -e deletecomments *.tex")
%L deletecomments = function (str)
%L return (str:gsub("%%[^\n]*\n[ \t]*", ""))
%L end
#####
#
# deletecomments: a better version
# 2021may14
#
#####
# «deletecomments-2021» (to ".deletecomments-2021")
# (find-dn6 "output.lua" "deletecomments")
# (find-dn6 "output.lua" "DeleteComments-class")
# (find-dn6 "output.lua" "DeleteComments-tests")
# (find-es "tex" "comments")
# (find-lua51manual "#pdf-string.reverse")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
bigstr = [[
foo%12
bar\plic%34
qoo%56
blep
bletch
%
woo
]]
DeleteComments = Class {
type = "DeleteComments",
split = function (bigstr)
local A = {}
for _,li in ipairs(splitlines(bigstr)) do
local a,b = li:match("^([^%%]*)(.*)")
table.insert(A, {a, b, "\n"})
end
return DeleteComments(A)
end,
__tostring = function (dc) return mytabletostring(dc) end,
__index = {
hascomment = function (dc, k) return dc[k][2] ~= "" end,
endswithcmd = function (dc, k)
return dc[k][1]:reverse():match("^[A-Za-z]+\\")
end,
addspaceaftercmd = function (dc, k)
dc[k][1] = dc[k][1].." "
end,
valid = function (dc, k) return 1 <= k and k <= #dc end,
ltrim = function (dc, k)
dc[k][1] = dc[k][1]:match("^[ \t]*(.*)")
end,
delcomment = function (dc, k)
if dc:endswithcmd(k) then dc:addspaceaftercmd(k) end
dc[k][2] = "" -- delete the "%..."
dc[k][3] = "" -- delete the newline
if dc:valid(k+1) then dc:ltrim(k+1) end
end,
delcomments = function (dc)
for k=1,#dc do if dc:hascomment(k) then dc:delcomment(k) end end
return dc
end,
concat = function (dc)
bigstr = ""
for k=1,#dc-1 do bigstr = bigstr..dc[k][1]..dc[k][2]..dc[k][3] end
if #dc > 0 then bigstr = bigstr..dc[#dc][1]..dc[#dc][2] end
return bigstr
end,
},
}
dc = DeleteComments.split(bigstr)
= dc
= dc:delcomments()
= dc:concat()
delcomments =
deletecomments1 = function (line)
local left,right = line:match("^([^%%]*)(.*)")
if right == "" then
end
deletecomments = function (bigstr)
local lines = splitlines(bigstr)
for i=1,#lines do
local line = lines[i]
local left,right = line:match("^([^%%]*)(.*)")
local newright = right
if right:match"^%%" then
if left:match"^[ \t]*$" then lines[i] = ""
if left:rev():match("[A-Za-z]+\\") then
newright = "\n"
else
newright =
end
PP(left, right)
end
end
= deletecomments(bigstr)
#####
#
# Coercion problems in LR.fromtcgspec in Lua 5.3
# 2019aug12
#
#####
# «LR.fromtcgspec-5.3» (to ".LR.fromtcgspec-5.3")
# (find-es "lua5" "coercions-5.3")
# (find-dn6 "tcgs.lua" "TCGSpec")
# (find-dn6 "tcgs.lua" "TCGSpec" "mp =")
# (find-dn6 "tcgs.lua" "TCGSpec" "zhaspec =")
# (find-dn6 "tcgs.lua" "TCGSpec" "zha =")
# (find-dn6 "zhaspecs.lua" "LR")
# (find-dn6 "zhaspecs.lua" "LR" "fromspec =")
# (find-dn6 "zhaspecs.lua" "LR" "fromtcgspec =")
# (find-dn6 "zhaspecs.lua" "LR" "fromtwocolgraph =")
# (find-dn6 "zhaspecs.lua" "LR" "zha =")
# (find-dn6file "zhaspecs.lua" " spec =")
# (find-dn6 "zhas.lua")
# (find-dn6 "zhas.lua" "ZHA")
# (find-dn6 "zhas.lua" "ZHA" "fromspec0 =")
# (find-dn6 "zhas.lua" "ZHA" "specwidths =")
# (find-dn6 "picture.lua" "V")
# (find-dn6 "picture.lua" "V" "to_l_r =")
[string "2019elephant-poster-z.tex:%R:860-873"]:14
# (find-LATEXfile "2019elephant-poster-z.tex" 860 14)
# (find-dn6 "zhas.lua" "MixedPicture")
# (find-dn6 "zhas.lua" "MixedPicture" "zfunction =")
# (find-dn6 "zhas.lua" "asciirectpoints-tests")
-- (find-LATEXfile "2019elephant-poster-z.tex" "house =")
* (eepitch-lua53)
* (eepitch-kill)
* (eepitch-lua53)
loaddednat6()
output = print
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
output = print
str = ".1.|2.3|4.5"
opts = {def="dagHouse", scale="4pt", meta="p b s"}
mp = MixedPicture.new(opts):zfunction(str)
= mp
= mp:tolatex()
* (eepitch-lua53)
* (eepitch-kill)
* (eepitch-lua53)
loaddednat6()
output = print
str = ".1.|2.3|4.5"
opts = {def="dagHouse", scale="4pt", meta="p b s"}
mp = MixedPicture.new(opts):zfunction(str)
= mp
= mp:tolatex()
kite = ".1.|2.3|.4.|.5."
house = ".1.|2.3|4.5"
W = "1.2.3|.4.5."
guill = ".1.2|3.4.|.5.6"
hex = ".1.2.|3.4.5|.6.7."
mp = MixedPicture.new({def="dagKite", meta="s", scale="5pt"}, z):zfunction(kite):output()
mp = MixedPicture.new({def="dagKite", meta="t", scale="4pt"}, z):zfunction(kite):output()
mp = MixedPicture.new({def="dagHouse", meta="s", scale="5pt"}, z):zfunction(house):output()
mp = MixedPicture.new({def="dagW", meta="s", scale="4pt"}, z):zfunction(W):output()
mp = MixedPicture.new({def="dagGuill", meta="s", scale="4pt"}, z):zfunction(guill):output()
mp = MixedPicture.new({def="dagHex", meta="s", scale="4pt"}, z):zfunction(hex):output()
kite = ".1.|2.3|.4.|.5."
house = ".1.|2.3|4.5"
W = "1.2.3|.4.5."
guill = ".1.2|3.4.|.5.6"
hex = ".1.2.|3.4.5|.6.7."
o = MixedPicture.new({def="dagKite", meta="s", scale="5pt"}, z)
o = MixedPicture.new({def="dagKite", meta="s", scale="5pt"}, z):zfunction(kite)
PPV(o)
mp = MixedPicture.new({def="dagKite", meta="s", scale="5pt"}, z):zfunction(kite):output()
mp = MixedPicture.new({def="dagKite", meta="t", scale="4pt"}, z):zfunction(kite)
mp = MixedPicture.new({def="dagHouse", meta="s", scale="5pt"}, z):zfunction(house)
mp = MixedPicture.new({def="dagW", meta="s", scale="4pt"}, z):zfunction(W)
mp = MixedPicture.new({def="dagGuill", meta="s", scale="4pt"}, z):zfunction(guill)
mp = MixedPicture.new({def="dagHex", meta="s", scale="4pt"}, z):zfunction(hex)
-- (find-dn6file "luarects.lua" "tozmp =")
-- (find-dn6 "luarects.lua" "ZHAFromPoints")
#####
#
# dednat6-xyoption-2cell
# 2019aug18
#
#####
# «dednat6-xyoption-2cell» (to ".dednat6-xyoption-2cell")
# (find-fline "~/LATEX/xy-problem-1.tex")
\documentclass{article}
%\usepackage{proof} % For derivation trees ("%:" lines)
\input diagxy % For 2D diagrams ("%D" lines)
\xyoption{curve} % For the ".curve=" feature in 2D diagrams
\xyoption{all}
\xyoption{2cell}
%\usepackage[all,2cell]{xy}
\usepackage{mathrsfs,amssymb,stmaryrd,bbm,mathtools, mathabx, enumitem, upgreek}
\usepackage{chngcntr}
\usepackage{ifluatex}
\begin{document}
#####
#
# Explaining the notations in PH1
# 2019sep18
#
#####
# «ph1-doc» (to ".ph1-doc")
# (ph1p 5 "positional")
# (ph1 "positional")
# (find-LATEX "2017planar-has-defs.tex" "picturedots")
# (find-LATEX "edrxpict.lua" "pictdots")g
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
#####
#
# harrownode
# 2019oct07
#
#####
# «harrownode» (to ".harrownode")
% (find-angg ".emacs.papers" "symbols")
% (find-symbolspage 108 "extarrows")
% (find-symbolstext 108 "extarrows")
% (find-dn6 "diagforth.lua" "place")
% \usepackage{extarrows}
%L forths["harrownode"] = function (x0, y0, x2, y2, dx0, dx2)
%L local node0, node2 = ds:pick(1), ds:pick(0)
%L local dx0, dx2, tex = getwordasluaexpr(), getwordasluaexpr()
%L local tex = getword() or werror()
%L local x0, y0, x2, y2 = node0.x, node0.y, node2.x, node2.y
%L local x1a, x1b = splitdist(x0, x2, dx0, 0, dx2) -- x1a=x1b
%L local x1, y1 = x1a, (y0 + y2)/2
%L PP(x1, y1, tex)
%L ds:push(storenode{x=x1, y=y1, TeX=tex})
%L ds:push(storearrow(DxyPlace {ds:pick(0)}))
%L end
\def\catA{\mathbf{A}}
\def\catB{\mathbf{B}}
$\xLongrightarrow[foo]{bar}$
%D diagram adj
%D 2Dx 100 +25 +25 +25
%D 2D 100 LA <--| A
%D 2D | |
%D 2D | <-> |
%D 2D v v
%D 2D +25 B |--> RB C --> D
%D 2D
%D 2D +15 \catB \catA
%D 2D
%D (( LA A <-|
%D LA B -> A RB ->
%D B RB |->
%D # LA RB harrownodes nil 20 nil <->
%D LA RB harrownode nil nil \xLongrightarrow[foo]{bar}
%D \catB \catA <- sl^ .plabel= a L
%D \catB \catA -> sl_ .plabel= b R
%D
%D C D -> .curve= ^10pt .plabel= a a
%D C D -> .curve= _10pt .plabel= b b
%D ))
%D enddiagram
%D
$$\pu
\diag{adj}
$$
#####
#
# extra-modules.tex: a discussion of the modules for ZHAs in dednat6
# 2019dec13
#
#####
# «extra-modules» (to ".extra-modules")
# (find-angg "dednat6/extra-modules.tex")
# (dnz)
# (find-dednat6 "dednat6/zhas.lua" "ZHA-tests")
# (find-dednat6 "dednat6/zhas.lua" "MixedPicture")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
z = ZHA.fromspec("12L1RRR2RL1"):PP():print()
z = ZHA.fromspec("123LLR432L1"):PP():print()
z = ZHA.fromspec("123RRL432R1"):PP():print()
= z
= z:tolatex()
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
output = function (str) print(str) end
-- (jopp 3 "basic-definitions")
-- (jos "basic-definitions")
tdims = TCGDims {qrh=5, q=15, crh=12, h=60, v=25, crv=7} -- with v arrows
tspec_PA = TCGSpec.new("46; 11 22 34 45, 25")
tspec_PAQ = TCGSpec.new("46; 11 22 34 45, 25", ".???", "???.?.")
oap = tspec_PA :mp ({zdef="O_A(P)"}) :addlrs()
oapj = tspec_PAQ:mp ({zdef="O_A(P),J"}):addlrs()
pa = tspec_PA :tcgq({tdef="(P,A)", meta="1pt p"}, "lr q h v ap")
paq = tspec_PAQ:tcgq({tdef="(P,A),Q", meta="1pt p"}, "lr q h v ap")
= tdims
= tspec_PA
= tspec_PAQ
= oap
= oapj
-- (find-dednat6 "dednat6/eoo.lua" "otype")
= otype(oap)
PP(keys(oap))
= VerticalTable(sorted(keys(oap)))
= PP(getmetatable(oap))
= PP(getmetatable(oap).__index)
= PP(sorted(keys(getmetatable(oap).__index)))
ofields = function (o) return VerticalTable(sorted(keys(oap))) end
omethods = function (o) return VerticalTable(sorted(keys(getmetatable(oap).__index))) end
= otype(oap)
= ofields(oap)
= omethods(oap)
= oap.cuts -- error
= oap.lp
= PP(oap.lp)
PPV(oap)
#####
#
# Converting code that uses the old TCG class to code that uses TCGQ
# 2019dec24
#
#####
# «converting-TCG-to-TCGQ» (to ".converting-TCG-to-TCGQ")
# Old: (find-LATEXgrep "grep --color -nH --null -e TCG.new *")
# (find-LATEX "edrxpict.lua" "TCG")
# (find-LATEX "edrxpict.lua" "TCG-tests")
# New: (find-LATEXgrep "grep --color -nH --null -e TCGDims *")
# (find-LATEXgrep "grep --color -nH --null -e TCGSpec *")
# (find-LATEX "dednat6/tcgs.lua")
#
# Meaning of the (new) parameters:
# (find-dednat6 "extra-modules.tex")
# (find-dednat6 "extra-modules.tex" "TCGs")
# (find-pdf-page "~/dednat6/extra-modules.pdf" 3)
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
--
-- An example of code using the old TCG class, from:
-- (find-LATEX "2017planar-has-1.tex" "2CGs")
-- (find-LATEX "2017planar-has-1.tex" "2CGs" "TCG.new")
--
loaddednat6()
chdir "~/LATEX/"
dofile "edrxtikz.lua" -- (find-LATEX "edrxtikz.lua")
dofile "edrxpict.lua" -- (find-LATEX "edrxpict.lua" "TCG")
output = function (str) print(str) end -- (find-es "dednat" "output-no-tex")
tcg_big = {scale="14pt", meta="p", dv=2, dh=2.75, ev=0.32, eh=0.275}
tcg_Big = {scale="14pt", meta="p", dv=2, dh=3.5, ev=0.32, eh=0.200}
tcg_medium = {scale= "9pt", meta="p s", dv=1, dh=2.2, ev=0.32, eh=0.275}
tcgnew = function (opts, def, str)
return TCG.new(opts, def, unpack(split(str, "[ %d]+")))
end
tcgbig = function (def, spec) return tcgnew(tcg_big, def, spec or tcg_spec) end
tcgBig = function (def, spec) return tcgnew(tcg_Big, def, spec or tcg_spec) end
tcgmed = function (def, spec) return tcgnew(tcg_medium, def, spec or tcg_spec) end
tcg = TCG.new(tcg_big, "foo", 3, 4, "34 23", "22 12"):lrs():vs():hs():output()
-- (find-LATEXfile "2019planar-has-1-body.tex" "TCG.new")
-- (find-LATEX "dednat6/tcgs.lua" "TCGSpec-test")
#####
#
# Downloading the PDFs of my .texs that require dednat4
# 2020jan27
#
#####
# «dednat4-pdfs-downloading» (to ".dednat4-pdfs-downloading")
# (find-twusfile "LATEX/")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
# (find-fline "/tmp/latexold/")
rm -Rv /tmp/latexold/
mkdir /tmp/latexold/
cd /tmp/latexold/
A=(
2007dnc-sets.pdf
2008bcc.pdf
2008comprcat.pdf
2008dnc-sets.pdf
2008filterp-abs.pdf
2008filterp.pdf
2008filterp-slides.pdf
2008gf.pdf
2008graphs.pdf
2008hyp.pdf
2008induction.pdf
2008modallogic.pdf
2008monads.pdf
2008natded.pdf
2008notations.pdf
2008projeto.pdf
2008sdg.pdf
2008sheaves-abs1.pdf
2008sheaves.pdf
2008topos-str.pdf
2009dnc-in-coq.pdf
2009dnc-monads.pdf
2009jul02-C2-exercicios.pdf
2009jun05.pdf
2009-planodetrabalho.pdf
2009unilog-abs1.pdf
2009unilog-diags.pdf
2009unilog-dnc.pdf
2010diags.pdf
2010kockdiff-new.pdf
2010kockdiff.pdf
2010reducao.pdf
2010unilog-2010jun21.pdf
2010unilog-current.pdf
2011ebl-abs.pdf
2011ebl-booklet-abs.pdf
2011ebl-slides.pdf
2012minicats.pdf
2013idct-changes.pdf
2013-montreal.pdf
2014istanbul-a.pdf
2014sfc-abstract.pdf
2014sfc-slides2h.pdf
2014sfc-slides2.pdf
2014sfc-slides.pdf
2015children.pdf
2015planar-has.pdf
)
for i in $A; do wget -nc http://angg.twu.net/LATEX/$i; done
#####
#
# dednat4-texs-converting
# 2020jan27
#
#####
# «dednat4-texs-converting» (to ".dednat4-texs-converting")
# (find-angg "LUA/texcatcodes.lua")
#####
#
# tikzdiagram and endtikzdiagram
# 2020feb16
#
#####
# «tikzdiagram» (to ".tikzdiagram")
# (find-dednat6 "dednat6/diagforth.lua" "high-level-tests")
# (find-dednat6 "dednat6/diagforth.lua" "diagram")
# (find-dednat6 "dednat6/diagforth.lua" "enddiagram")
# (find-dednat6 "dednat6/diagtikz.lua")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
forths["tikzdiagram"] = function ()
diagramname = getword() or derror("No diagram name")
xys = {}
nodes = VerticalTable {}
arrows = VerticalTable {}
lasty = nil
end
forths["endtikzdiagram"] = function ()
-- output(arrows_to_defdiag(diagramname, tf:hyperlink()))
print(arrows)
end
dxyrun [[ tikzdiagram ?? ]]
dxyrun [[ 2Dx 100 +40 ]]
dxyrun [[ 2D 100 A --> B ]]
dxyrun [[ 2D | ]]
dxyrun [[ 2D +30 C ]]
dxyrun [[ 2D ]]
dxyrun [[ (( A B -> .plabel= a foo ]]
dxyrun [[ B C => .plabel= r bar ]]
dxyrun [[ A C |-> .plabel= m plic ]]
dxyrun [[ ]]
dxyrun [[ )) ]]
dxyrun [[ endtikzdiagram ]]
-- (find-dednat6 "dednat6/diagtex.lua" "arrows_to_defdiag")
-- (find-dednat6 "dednat6/diagtex.lua" "arrow_to_TeX")
print(arrows)
PP(arrows[1])
PP(arrows[1].from)
PP(arrows[1].to)
PP(nodes[arrows[1].from])
PP(nodes[arrows[1].to])
#####
#
# plabel-error-handling
# 2020jul25
#
#####
# «plabel-error-handling» (to ".plabel-error-handling")
# (find-dednat6 "dednat6/diagforth.lua" "high-level-tests")
# (find-dednat6 "dednat6/diagforth.lua" "diagram")
# (find-dednat6 "dednat6/diagforth.lua" "enddiagram")
# (find-dednat6 "dednat6/diagtikz.lua")
# (find-dednat6 "dednat6/diagforth.lua" "diag-head" "dxyrun =")
# (find-dednat6 "dednat6/parse.lua" "getword")
# (find-LATEX "2020dn6-error-handling.lua")
# (dne)
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
getword1 = function (errmsg) return getword() or error(errmsg) end
forths[".plabel="] = function ()
local p = getword1("In '.plabel=': missing first argument (placement)")
local label = getword1("In '.plabel=': missing second argument (label)")
arrow.placement, arrow.label = p, label
end
dxyrun [[ diagram ?? ]]
dxyrun [[ 2Dx 100 +40 ]]
dxyrun [[ 2D 100 A --> B ]]
dxyrun [[ 2D | ]]
dxyrun [[ 2D +30 C ]]
dxyrun [[ 2D ]]
dxyrun [[ (( A B -> .plabel= aafoo ]]
dxyrun [[ A W -> .plabel= aafoo ]]
dxyrun [[ )) ]]
dxyrun [[ # enddiagram ]]
#####
#
# bussproofs
# 2020aug22
#
#####
# «bussproofs» (to ".bussproofs")
# (find-es "tex" "bussproofs-victor")
# (find-angg "LUA/lua50init.lua" "loaddednat6")
# (find-LATEX "dednat6load.lua")
# (find-LATEX "dednat6/heads6.lua" "tree-head")
# (find-LATEX "dednat6/block.lua" "TexLines")
# (find-LATEX "dednat6/treesegs.lua" "allsegments-tests")
# (find-LATEX "dednat6/treetex.lua" "TreeNode")
# (find-LATEX "dednat6/treetex.lua" "TreeNode" "TeX_deftree =")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
require "block"
bigstr = [[
%: H
%: ...
%: A B C E F \Pi
%: =======r ::::\phi ...
%: D G I
%: -------------------
%: J
%:
%: ^bars
%:
]]
output = print
output("foo")
texlines = TexLines.new("test", bigstr)
tf = texlines:toblock()
PP(headblocks)
tf:processuntil(texlines:nlines())
PP(headblocks)
= allsegments[9]
seg = allsegments[9][1]
name = "bars"
output(seg:rootnode():totreenode():TeX_deftree(name))
= seg:rootnode()
= seg:rootnode():totreenode()
tree = seg:rootnode():totreenode()
= tree
= tree[1]
= tree[3]
= tree[3][1]
= tree[3][1][1]
PPV(tree)
PPV(tree[3][1][1])
-- (find-bussguidepage 6 "\\QuaternaryInfC{form}")
-- (find-bussguidetext 6 "\\QuaternaryInfC{form}")
-- (find-bussguidepage 8 "\\RightLabel{text}")
-- (find-bussguidetext 8 "\\RightLabel{text}")
-- (find-bussguidepage 9 "\\doubleLine")
-- (find-bussguidetext 9 "\\doubleLine")
BussProofs = Class {
type = "BussProofs",
new = function () return BussProofs {} end,
__index = {
unabbrev = function (bp, str) return unabbrev(str) end,
tolatex = function (bp, tn, i)
local i_,i__ = i.." ", i.." "
if not tn:hasbar() then
local r_ = tn:TeX_root()
return i.."\\AxiomC{$"..bp:unabbrev(r_).."$}"
else
local r_ = tn:TeX_root()
local b_ = tn:barchar()
local l_ = tn:TeX_label()
local h_ = tn:hypslist()
local r = "\\mathstrut "..bp:unabbrev(r_)
local s = function (indent, str)
return str and (indent..str.."\n") or ""
end
local Lines = {["-"]=nil,
["="]="\\doubleLine",
["."]="\\noLine"}
local Line = Lines[b_]
local Label = l_ and format("\\RightLabel{$%s$}", l_)
local Infs = {"\\UnaryInfC",
"\\BinaryInfC",
"\\TrinaryInfC",
"\\QuaternaryInfC",
"\\QuinaryInfC"}
local Inf = format("%s{$%s$}", Infs[#h_], bp:unabbrev(r_))
local f = function (tn) return bp:tolatex(tn, i__) end
local Hyps = mapconcat(f, h_, i__.."\n")
return Hyps.."\n"..s(i_,Line)..s(i_,Label)..i..Inf
end
end,
todefded = function (bp, tn, name, link)
local comment = " % "..(link or tf:hyperlink())
return "\\defdedbuss{"..name.."}{"..comment.."\n"..
bp:tolatex(tn, " ").."\n }"
end,
},
}
bp = BussProofs.new()
= bp:tolatex(tree, "")
= bp:tolatex(tree, " ")
= bp:todefded(tree, "NAME")
ee_dofile "~/LATEX/2020dn6-error-handling.lua"
bp = BussProofs.new()
= bp:todefded(tree, "NAME")
#####
#
# The word "at:" and the new syntax for calculating with "v"s
# 2020dec04
#
#####
# «at:» (to ".at:")
# (find-LATEX "2020ats.tex")
# (find-dn6 "dednat6.lua")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
Node = Class {
type = "Node",
__tostring = function (node) return mytostring(node) end,
__index = {
v = function (node) return v(node.x,node.y) end,
setv = function (node,v) node.x=v[1]; node.y=v[2]; return node end,
},
}
storenode = function (node)
node = Node(node)
table.insert(nodes, node)
node.noden = #nodes -- nodes[node.noden] == node
if node.tag then -- was: "and not nodes[node.tag]"...
nodes[node.tag] = node -- nodes[node.tag] == node
end
return node
end
dxyrun [[ diagram ?? ]]
dxyrun [[ 2Dx 100 +40 ]]
dxyrun [[ 2D 100 A0 -------------> A1 ]]
dxyrun [[ 2D | ----- B4 B5 | ]]
dxyrun [[ 2D | \ B3\ | ]]
dxyrun [[ 2D | \B2 v | ]]
dxyrun [[ 2D v B0 B1 ----> v ]]
dxyrun [[ 2D +40 A2 -------------> A3 ]]
dxyrun [[ 2D ]]
dxyrun [[ # (( A B -> .plabel= aafoo ]]
dxyrun [[ # A W -> .plabel= aafoo ]]
dxyrun [[ # )) ]]
dxyrun [[ # enddiagram ]]
= nodes
= v(10,20)
= v(10,20) + v(3,4)
= 10 * v(10,20) + v(3,4)
= tow
tow = function (vv, ww, a, b)
local diff = ww-vv
local diffrot90 = v(diff[2], -diff[1])
return vv + (a or 0.5)*diff + (b or 0)*diffrot90
end
ats_to_vs = function (str)
return (str:gsub("@(%w+)", "nodes[\"%1\"]:v()"))
end
forths["newnode:"] = function ()
local tag = getword()
ds:push(storenode({tag=tag, TeX=phantomnode}))
end
forths["at:"] = function ()
local node = ds:pick(0)
local vexpr = getword()
node:setv(expr(ats_to_vs(vexpr)))
end
dxyrun [[ (( newnode: B0 at: tow(@A0,@A2,0.75,0.25) ]]
dxyrun [[ newnode: B1 at: @B0+v(10,0) ]]
dxyrun [[ )) ]]
= nodes
= tow(v(100,200), v(110,200))
= tow(v(100,200), v(110,200), 0.1)
= tow(v(100,200), v(110,200), 0.1, 1)
= nodes[1]
= otype(nodes[1])
= otype(nodes)
= nodes[1]:v()
= nodes[1][1], nodes[1][2]
= v(nodes[1][1],nodes[1][2])
= ats_to_vs("@A0 + @A1")
= expr(ats_to_vs("@A0 + @A1"))
= expr(ats_to_vs("tow(@A0,@A1)"))
-- (find-angg "LUA/lua50init.lua" "VerticalTable")
-- (find-dn6 "diagstacks.lua" "nodes")
-- (find-dn6 "diagforth.lua" "relplace")
-- (find-dn6grep "grep --color -nH --null -e storenode *.lua")
-- (find-dn6grep "grep --color -nH --null -e phantom *.lua")
#####
#
# Instructions to use Dednat6 in TeXStudio
# 2021jan20
#
#####
# «texstudio» (to ".texstudio")
# (find-es "tex" "texstudio")
# http://angg.twu.net/dednat6.html#essential-files
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
# (find-fline "/tmp/ts/")
rm -Rv /tmp/ts/
mkdir /tmp/ts/
cd /tmp/ts/
cd ~/dednat6/
cp -aiv demo-minimal.tex dednat6load.lua dednat6/ /tmp/ts/
cd /tmp/ts/
texstudio demo-minimal.tex
# Configurations:
# Options -> Configure TeXstudio -> Build -> Default compiler -> LuaLaTeX
# Options -> Configure TeXstudio -> Show advanced options [turn on]
# Options -> Configure TeXstudio -> Build -> Build Options -> Show stdout -> Always
# On why we (sometimes) need stdout:
# (find-dn6articlepage 3 "The preprocessor outputs this on stdout:")
# (find-dn6articletext 3 "The preprocessor outputs this on stdout:")
# (find-dn6articlepage 3 "3 Semi-preprocessors")
# (find-dn6articletext 3 "3 Semi-preprocessors")
# (find-dn6slidespage 14 "output" "\\defdiag")
# (find-dn6slidestext 14 "output" "\\defdiag")
#####
#
# repl-pict: create pict2e code from a REPL
# 2021feb08
#
#####
# «repl-pict» (to ".repl-pict")
# (find-LATEX "2021repl-pict.tex")
# (find-LATEX "edrxtikz.lua")
# (find-LATEX "edrxpict.lua")
# (find-LATEX "2017planar-has-defs.tex" "picturedotsdef")
# (find-LATEX "edrxpict.lua" "defpictdots")
# (find-LATEXfile "dednat6/zhas.lua")
# (find-dn6 "tcgs.lua")
# (find-dn6 "tcgs.lua" "TCGQ")
# (find-dn6 "picture.lua" "BoundingBox")
# (find-dn6 "picture.lua" "BoundingBox" "addpoint =")
# (find-dn6 "picture.lua" "LPicture")
# (find-dn6 "picture.lua" "LPicture-tests")
# (find-dn6 "picture.lua" "metaopts")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
-- require "picture.lua"
lp = LPicture.new {cellfont="\\scriptsize"}
lp = LPicture.new {cellfont="\\scriptsize", meta="b"}
for l=0,2 do
for r=0,3 do
local pos=lr(l, r)
lp:put(pos, pos:xy())
end
end
= lp
= lp:tolatex()
ee_writefile("~/LATEX/o.tex", "$"..lp:tolatex().."$")
-- (find-angg "LUA/lua50init.lua" "repltexthis")
repltexthis(lp:tolatex())
#####
#
# Drawing Lawvere-Tierney topologies (with cuts on each \Omega(u))
# 2021apr03
#
#####
# «lawvere-tierney» (to ".lawvere-tierney")
# (find-dn6 "tcgs.lua" "TCGSpec")
# (find-dn6 "tcgs.lua" "TCGSpec" "mp =")
# (find-dn6 "tcgs.lua" "TCGSpec" "mpunder =")
# (find-dn6 "zhas.lua" "MixedPicture-cuts")
# (find-dn6 "zhas.lua" "MixedPicture-cuts" "addcutssub =")
# (find-dn6 "zhas.lua" "MixedPicture-zha")
# (find-dn6 "zhas.lua" "MixedPicture-zha" "zhalr =")
# (find-dn6 "zhas.lua" "MixedPicture-zha" "zhalrf0 =")
# (find-dn6 "zhas.lua" "ZHA-shrinktop")
# (find-dn6 "zhas.lua" "ZHA-test-shrinktop")
# (find-es "dednat" "sub-ZHA")
# (cltp 28 "SetT-classifier-defs")
# (clt "SetT-classifier-defs")
# (cltp 38 "def-j-example")
# (clt "def-j-example")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
ts = TCGSpec.new("33; 32, ", ".??",".??")
= ts:zhaspec()
= ts:zha()
= ts:zha():shrinktop(v"32")
= ts:zha():shrinktop(v"32").spec
= ts:hasqmarks()
= ts:cuts()
= "c "..ts:cuts()
utop = "32"
zhaspec = ts:zhaspec()
zha = ts:zha()
uzha = ts:zha():shrinktop(v(utop))
ucuts = "c "..ts:cuts()
ulrf = "lr -> lr:below(v'"..utop.."') and lr:lr() or '..'"
mp = ts:mp({zdef="?", scale="12pt", meta=""})
mp = mpnew({zdef="?", scale="12pt", meta=""}, zhaspec)
mp:zhalrf0(ulrf)
= mp
mp.cuts:addcuts(uzha, ucuts)
= mp
-- «lawvere-tierney-mpunder» (to ".lawvere-tierney-mpunder")
-- (find-dn6 "tcgs.lua" "TCGSpec" "mp =")
-- (find-dn6 "tcgs.lua" "TCGSpec" "mpunder =")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
output = print
ts = TCGSpec.new("33; 32, ")
ts = TCGSpec.new("33; 32, ", ".??",".??")
mp = ts:mpunder("32", {zdef="A:j:3_", scale="12pt", meta=""}):print()
mp = ts:mpunder("20", {zdef="A:j:2_", scale="12pt", meta=""}):print()
mp = ts:mpunder("10", {zdef="A:j:1_", scale="12pt", meta=""}):print()
mp = ts:mpunder("03", {zdef="A:j:_3", scale="12pt", meta=""}):print()
mp = ts:mpunder("02", {zdef="A:j:_2", scale="12pt", meta=""}):print()
mp = ts:mpunder("01", {zdef="A:j:_1", scale="12pt", meta=""}):print()
#####
#
# V3: a variant of the class V for 3D vectors
# 2021apr19
#
#####
# «V3» (to ".V3")
# (find-dn6 "picture.lua" "V")
# (find-angg "LATEX/2020-2-C3-plano-tang.lua")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
V3 = Class {
type = "V3",
__tostring = function (v) return v:tostring() end,
__add = function (v, w) return V3{v[1]+w[1], v[2]+w[2], v[3]+w[3]} end,
__sub = function (v, w) return V3{v[1]-w[1], v[2]-w[2], v[3]-w[3]} end,
__unm = function (v) return v*-1 end,
__mul = function (v, w)
local ktimesv = function (k, v) return V3{k*v[1], k*v[2], k*v[3]} end
local innerprod = function (v, w) return v[1]*w[1] + v[2]*w[2] + v[3]*w[3] end
if type(v) == "number" and type(w) == "table" then return ktimesv(v, w)
elseif type(v) == "table" and type(w) == "number" then return ktimesv(w, v)
elseif type(v) == "table" and type(w) == "table" then return innerprod(v, w)
else error("Can't multiply "..tostring(v).."*"..tostring(w))
end
end,
__index = {
tostring = function (v) return v:v3string() end,
v3string = function (v) return pformat("(%s,%s,%s)", v[1], v[2], v[3]) end,
v2string = function (v) return tostring(v:tov2()) end,
tov2 = function (v) return v[1]*v.p1 + v[2]*v.p2 + v[3]*v.p3 end,
p1 = V{2,-1},
p2 = V{2,1},
p3 = V{0,2},
},
}
v3 = function (x,y,z) return V3{x,y,z} end
= v3(2,3,4)
= v3(2,3,4)*10
= v3(2,3,4):v2string()
V3.__index.tostring = function (v) return v:v3string() end
V3.__index.tostring = function (v) return v:v2string() end
= expr("v3(2,3,4)")
foo = function (str)
local f = function (s) return tostring(expr(s)) end
return (str:gsub("<([^<>]+)>", f))
end
-- (find-dn6 "heads6.lua" "lua-head")
= Pict
= foo "ab<1+2>cd<v3(2,3,4)>"
return string.gsub(str, "%$([%a_][%w_]*)", function (e)
return getenv(e) or ""
end)
#####
#
# Functions to draw multiplication and division of polynomials
# 2021apr25
#
#####
# «drawing-polys» (to ".drawing-polys")
# (find-LATEXfile "2020-2-C2-ids-trigs.lua")
# (c2m202itp 2 "div-polis")
# (c2m202it "div-polis")
#####
#
# Diagramas de numerozinhos - low-level approach
# 2021apr29
#
#####
# «numerozinhos» (to ".numerozinhos")
# (find-LATEX "2020-2-C3-P1.tex" "numerozinhos")
# (mpgp 24 "Fxy")
# (mpg "Fxy")
# (find-LATEX "material-para-GA.tex" "pictureFxy")
# (find-LATEX "edrxpict.lua" "pictFxy")
# (find-LATEX "edrxpict.lua" "pictFxy" "tcell")
# (find-LATEX "2020-2-C2-ids-trigs.lua")
# (find-LATEX "2020-2-C2-ids-trigs.lua" "CCells")
# (find-LATEX "2020-2-C2-ids-trigs.lua" "CCells" "addlatexto =")
# (find-dn6 "zhas.lua" "MixedPicture")
# (find-dn6 "picture.lua" "AsciiPicture")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
f = function (x,y) return min(x,y) end
mp = MixedPicture.new({zdef="demo", scale="10pt", meta=""})
mp.ap.s = " "
mp.lp:addt("\\Line(-3,0)(3,0)")
mp.lp:addt("\\Line(0,3)(0,-3)")
for y=2,-2,-1 do
for x=-2,2 do
mp:put(v(x,y), tostring(f(x,y)))
end
end
= mp
= mp:tolatex()
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
MixedPicture.__index.addnumerosaxes = function (mp, xmin, xmax, ymin, ymax)
mp.lp:addt("\\Line(%s,0)(%s,0)", xmin-0.5, xmax+0.5)
mp.lp:addt("\\Line(0,%s)(0,%s)", ymin-0.5, ymax+0.5)
return mp
end
MixedPicture.__index.addnumerozinhos = function (mp, xmin, xmax, ymin, ymax, f)
for y=ymin,ymax do
for x=xmin,xmax do
mp:put(v(x,y), tostring(f(x,y)))
end
end
return mp
end
mp = MixedPicture.new({zdef="demo", scale="10pt", meta=""})
mp.ap.s = " "
f = function (x,y) return min(x,y) end
mp:addnumerosaxes (-2,4, -2,4)
mp:addnumerozinhos(-2,4, -2,4, f)
= mp
#####
#
# error-2021-04-21
# 2021apr21
#
#####
# «error-2021-04-21» (to ".error-2021-04-21")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rfv /tmp/dednat6/
mkdir /tmp/dednat6/
cd /tmp/dednat6/
wget http://angg.twu.net/dednat6.zip
unzip dednat6.zip
export PATH=/usr/local/texlive/2021/bin/x86_64-linux:$PATH
lualatex demo-minimal.tex
#####
#
# Show non-open sets using color
# 2021may08
#
#####
# «color-non-open» (to ".color-non-open")
# (find-LATEX "2021groth-tops-children.lua" "zha-colors")
# (find-dn6 "picture.lua" "V")
# (find-dn6 "picture.lua" "AsciiPicture")
# (find-dn6 "picture.lua" "AsciiPicture" "put =")
# (find-dn6 "picture.lua" "AsciiPicture-tests")
# (find-dn6 "zhas.lua" "MixedPicture")
# (find-dn6 "zhas.lua" "MixedPicture" " celltotex =")
# (find-dn6 "zhas.lua" "MixedPicture" " put =")
# (find-dn6 "zhas.lua" "MixedPicture" " addcells =")
# (find-dn6 "zhas.lua" "MixedPicture-tests")
# (find-LATEX "2021groth-tops-defs.tex" "ArtDecoNQ")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
= v"20"
= v"20":And(v"11")
= v"20":And(v"11"):lr()
= v"20":Or (v"11"):lr()
V.__index.minmaxlr = function (A, B)
local minl,minr = A:And(B):to_l_r()
local maxl,maxr = A:Or (B):to_l_r()
return minl,maxl,minr,maxr
end
= v"46":minmaxlr(v"53")
betweens = function (A, B)
A, B = v(A), v(B)
local minl,minr = A:And(B):to_l_r()
local maxl,maxr = A:Or (B):to_l_r()
return cow(function ()
for l=minl,maxl do
for r=minr,maxr do
coy(l, r)
end
end
end)
end
for l,r in betweens("46", "53") do print(l, r) end
MixedPicture.__index.putcolor = function (mp, A, str)
A = v(A)
str = str:gsub("~", A:lr())
mp.ap:put(A, str)
return mp
end
MixedPicture.__index.putcolors = function (mp, A, B, str)
for l,r in betweens(A, B) do
mp:putcolor(v(l, r):lrtoxy(), str)
end
return mp
end
MixedPicture.__index.putleftgen = function (mp, l, r, green, red, orange, yellow)
local lr = function (l, r) return v(l, r):lrtoxy() end
mp:putcolor (lr(l, r), green or "\\G~")
mp:putcolors(lr(l, r-1), thisleft, yellow or "\\Y~")
mp:putcolor (lr(l, r-1), red or "\\R~")
mp:putcolor (lr(l, r-2), orange or "\\O~")
mp:putcolor (lr(l+1, r-1), orange or "\\O~")
return mp
end
MixedPicture.__index.putrightgen = function (mp, l, r, green, red, orange, yellow)
local lr = function (l, r) return v(l, r):lrtoxy() end
mp:putcolor (lr(l, r), green or "\\G~")
mp:putcolors(lr(l-1, r), thisright, yellow or "\\Y~")
mp:putcolor (lr(l-1, r), red or "\\R~")
mp:putcolor (lr(l-2, r), orange or "\\O~")
mp:putcolor (lr(l-1, r+1), orange or "\\O~")
return mp
end
MixedPicture.__index.transfercolors = function (mp)
for l,r in betweens("00", thistop) do
local str = bitrim(mp.ap:get(lr(l, r)))
if str ~= "" then mp.lp:put(lr(l, r), str) end
end
return mp
end
= lr
= lr(2,0)
-- (jonp 3 "basic-definitions")
-- (jos "basic-definitions")
-- (jonp 16 "valuations")
-- (jov "valuations")
thistop = v"46"
thisleft = v"40"
thisright = v"06"
Foo_ts = TCGSpec.new("43; , ")
Foo_mp = Foo_ts:mp({zdef="H_zha", scale="11pt", meta=nil})
Foo_mp.ap.s = " "
Foo_mp:putcolors("00", "46", "~")
Foo_mp:putleftgen(2, 2)
Foo_mp:putrightgen(2, 5)
= Foo_mp
Foo_mp:putleftgen(2, 2, nil, "", "", "")
Foo_mp:putrightgen(2, 5, nil, "", "", "")
= Foo_mp
Foo_mp:transfercolors()
= Foo_mp:tolatex()
#####
#
# The "pictreplace" head for "%P" lines
# 2021aug09
#
#####
# «pictreplace» (to ".pictreplace")
# (find-LATEX "2020-2-C3-plano-tang.lua" "pictreplace")
# (find-LATEX "2020-2-C3-plano-tang.lua" "pictreplace-tests")
# (find-dednat6 "tugboat-rev2.tex" "creating-new-heads")
# (find-pdf-page "~/dednat6/tugboat-rev2.pdf" 5)
# Used in:
# (find-LATEXgrep "grep --color=auto -nH --null -e '%P' 202*.tex")
# (c3m202planotangp 27 "3D-fig")
# (c3m202planotanga "3D-fig")
# (c3m211cnp 15 "figura-piramide")
# (c3m211cna "figura-piramide")
# (c3m211dpp 11 "3D-fig")
# (c3m211dpa "3D-fig")
# (c3m211nfp 18 "quadraticas-exemplos")
# (c3m211nfa "quadraticas-exemplos")
# (c3m211nfa "quadraticas-exemplos" "%P")
#####
#
# Convert the tree in 2021burghardt.tex to an UndTree
# 2021sep29
#
#####
# «burghardt» (to ".burghardt")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
require "block" -- (find-dn6 "block.lua")
= Path.prepend("path", "~/LUA/?.lua")
require "Rect" -- (find-angg "LUA/Rect.lua" "undtolatex-tests")
-- (find-LATEX "2021burghardt.tex" "tree")
texfile0("~/LATEX/2021burghardt.tex")
= tf
output = print
tf:processuntil(tf.j)
= tf
= allsegments
= allsegments[79]
= allsegments[79][1]
caretsegs = {}
for n,segments in pairs(allsegments) do
local seg = segments[1]
if seg and seg.t:match("^^") then print(seg); caretsegs[seg.t] = seg end
end
PPV(caretsegs)
caretseg = caretsegs["^Bur-tree"]
= caretseg
= caretseg:rootnode()
= caretseg:rootnode():totreenode()
tree = caretseg:rootnode():totreenode()
= tree
PPV(tree)
= undtolatex(tree)
defbody = undtolatex(tree)
deffull = "\\def\BurUnd{\n"..defbody.."\n}"
= deffull
output(deffull)
caretsegs = {}
for n,segments in pairs(allsegments) do
local seg = segments[1]
if seg and seg.t:match("^^") then print(seg); caretsegs[seg.t] = seg end
end
caretseg = caretsegs["^Bur-tree"]
tree = caretseg:rootnode():totreenode()
defbody = undtolatex(tree)
deffull = "\\def\BurUnd{\n"..defbody.."\n}"
output(deffull)
-- (find-dn6 "treetex.lua" "ProofSty-test")
-- (find-dn6 "treesegs.lua")
-- (find-dn6 "heads6.lua" "tree-head")
#####
#
# lean-nng
# 2021oct13
#
#####
# «lean-nng» (to ".lean-nng")
# (find-dn6 "treesegs.lua" "Segments")
# (find-LATEXfile "2021lean-nng.tex")
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
output = print
require "block" -- (find-dn6 "block.lua")
-- (find-LATEX "2021lean-nng.tex" "tree")
texfile0("~/LATEX/2021lean-nng.tex")
= tf
tf:processuntil(tf.j)
= tf
= Path.prependtopath "~/LUA/?.lua"
require "Rect" -- (find-angg "LUA/Rect.lua")
require "Re" -- (find-angg "LUA/Re.lua")
lean_gram = [=[
stuff <- {~ ( wordsf / special / . ) * ~}
wordsf <- {~ ("" -> "\textsf{") word ("" -> "}")~}
word <- {~ ([A-Za-z0-9]+ / ('_' -> '\_')) + ~}
special <- ( '[' / ']' / '.' ) -> specials
]=]
lean_specials = {
["["] = "<<",
["]"] = ">>",
["."] = "\\,",
}
lean_rt0 = Re { grammar = lean_gram, defs = {specials = lean_specials} }
lean_rtp = Re { grammar = lean_gram, defs = {specials = lean_specials}, print = PP }
lean_rtp:c 'top <- word' 'foo_bar0plic bletch'
lean_rtp:c 'top <- wordsf' 'foo_bar0plic bletch'
lean_rtp:c 'top <- stuff' 'foo_bar0plic bletch'
lean_rtp:c 'top <- stuff' 'foo_bar0plic.[bletch]'
lean_rt0:c 'top <- stuff' 'foo_bar0plic.[bletch]'
lean_rtranslate = lean_rt0:c 'top <- stuff'
PP(lean_rtranslate 'foo_bar0plic.[bletch]')
proofsty = ProofSty.new()
proofsty.unabbrev = function (ps, str)
return lean_rtranslate(str)
end
TreeNode.__index.TeX_deftree = function (tn, name, link)
return proofsty:todefded(tn, name, link)
end
texfile0("~/LATEX/2021lean-nng.tex")
tf:processuntil(tf.j)
# Old:
* (eepitch-lua51)
* (eepitch-kill)
* (eepitch-lua51)
loaddednat6()
= Path.prependtopath "~/LUA/?.lua"
require "block" -- (find-dn6 "block.lua")
require "Rect" -- (find-angg "LUA/Rect.lua")
-- (find-LATEX "2021lean-nng.tex" "tree")
texfile0("~/LATEX/2021lean-nng.tex")
= tf
output = print
tf:processuntil(tf.j)
= tf
PPPV(allsegments)
= allsegments
= allsegments:last(1000)
= allsegments:last(1000):totreenode()
#####
#
# fitch
# 2021oct20
#
#####
# «fitch» (to ".fitch")
# «ftch» (to ".ftch")
# (find-angg ".emacs" "dednat6-ftch")
# (find-es "tex" "kluwer-fitch")
# (find-LATEX "2021fitch.tex" "defftch")
# (find-LATEX "2021fitch.lua")
#####
#
# slides-to-pngs
# 2022oct22
#
#####
# «slides-to-pngs» (to ".slides-to-pngs")
# (find-fline "~/IMAGES/")
# (find-fline "~/IMAGES/" "dednat6")
# (find-pdf-page "~/dednat6/tug-slides.pdf")
# (find-man "pdftoppm")
# (find-TH "dednat6" "introduction")
* (eepitch-shell)
* (eepitch-kill)
* (eepitch-shell)
rm -Rv /tmp/pdf-jpg-pdf/
mkdir /tmp/pdf-jpg-pdf/
cd /tmp/pdf-jpg-pdf/
# pdftoppm -jpeg -jpegopt quality=80 -r 150 ~/dednat6/tug-slides.pdf b
# pdftoppm -jpeg -jpegopt quality=80 -r 60 ~/dednat6/tug-slides.pdf b
pdftoppm -png -r 100 ~/dednat6/tug-slides.pdf dednat6-slides
pdftoppm -png -r 125 ~/dednat6/tug-slides.pdf dednat6-slides
# (find-fline "/tmp/pdf-jpg-pdf/")
# (find-fline "/tmp/pdf-jpg-pdf/dednat6-slides-07.png")
# (find-fline "/tmp/pdf-jpg-pdf/dednat6-slides-09.png")
# (find-fline "/tmp/pdf-jpg-pdf/dednat6-slides-10.png")
cd /tmp/pdf-jpg-pdf/
cp -v dednat6-slides-07.png ~/IMAGES/
cp -v dednat6-slides-09.png ~/IMAGES/
cp -v dednat6-slides-10.png ~/IMAGES/
makeL; makeR
# Local Variables:
# coding: utf-8-unix
# End: